Update drivers and middleware
- Generated from STM32CubeMX
This commit is contained in:
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,39 @@
|
||||
/**************************************************************************//**
|
||||
* @file cmsis_version.h
|
||||
* @brief CMSIS Core(M) Version definitions
|
||||
* @version V5.0.5
|
||||
* @date 02. February 2022
|
||||
******************************************************************************/
|
||||
/*
|
||||
* Copyright (c) 2009-2022 ARM Limited. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the License); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*/
|
||||
|
||||
#if defined ( __ICCARM__ )
|
||||
#pragma system_include /* treat file as system include file for MISRA check */
|
||||
#elif defined (__clang__)
|
||||
#pragma clang system_header /* treat file as system include file */
|
||||
#endif
|
||||
|
||||
#ifndef __CMSIS_VERSION_H
|
||||
#define __CMSIS_VERSION_H
|
||||
|
||||
/* CMSIS Version definitions */
|
||||
#define __CM_CMSIS_VERSION_MAIN ( 5U) /*!< [31:16] CMSIS Core(M) main version */
|
||||
#define __CM_CMSIS_VERSION_SUB ( 6U) /*!< [15:0] CMSIS Core(M) sub version */
|
||||
#define __CM_CMSIS_VERSION ((__CM_CMSIS_VERSION_MAIN << 16U) | \
|
||||
__CM_CMSIS_VERSION_SUB ) /*!< CMSIS Core(M) version number */
|
||||
#endif
|
||||
@@ -0,0 +1,952 @@
|
||||
/**************************************************************************//**
|
||||
* @file core_cm0.h
|
||||
* @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
|
||||
* @version V5.0.8
|
||||
* @date 21. August 2019
|
||||
******************************************************************************/
|
||||
/*
|
||||
* Copyright (c) 2009-2019 Arm Limited. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the License); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*/
|
||||
|
||||
#if defined ( __ICCARM__ )
|
||||
#pragma system_include /* treat file as system include file for MISRA check */
|
||||
#elif defined (__clang__)
|
||||
#pragma clang system_header /* treat file as system include file */
|
||||
#endif
|
||||
|
||||
#ifndef __CORE_CM0_H_GENERIC
|
||||
#define __CORE_CM0_H_GENERIC
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/**
|
||||
\page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
|
||||
CMSIS violates the following MISRA-C:2004 rules:
|
||||
|
||||
\li Required Rule 8.5, object/function definition in header file.<br>
|
||||
Function definitions in header files are used to allow 'inlining'.
|
||||
|
||||
\li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
|
||||
Unions are used for effective representation of core registers.
|
||||
|
||||
\li Advisory Rule 19.7, Function-like macro defined.<br>
|
||||
Function-like macros are used to allow more efficient code.
|
||||
*/
|
||||
|
||||
|
||||
/*******************************************************************************
|
||||
* CMSIS definitions
|
||||
******************************************************************************/
|
||||
/**
|
||||
\ingroup Cortex_M0
|
||||
@{
|
||||
*/
|
||||
|
||||
#include "cmsis_version.h"
|
||||
|
||||
/* CMSIS CM0 definitions */
|
||||
#define __CM0_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */
|
||||
#define __CM0_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */
|
||||
#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16U) | \
|
||||
__CM0_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */
|
||||
|
||||
#define __CORTEX_M (0U) /*!< Cortex-M Core */
|
||||
|
||||
/** __FPU_USED indicates whether an FPU is used or not.
|
||||
This core does not support an FPU at all
|
||||
*/
|
||||
#define __FPU_USED 0U
|
||||
|
||||
#if defined ( __CC_ARM )
|
||||
#if defined __TARGET_FPU_VFP
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
|
||||
#if defined __ARM_FP
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#elif defined ( __GNUC__ )
|
||||
#if defined (__VFP_FP__) && !defined(__SOFTFP__)
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#elif defined ( __ICCARM__ )
|
||||
#if defined __ARMVFP__
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#elif defined ( __TI_ARM__ )
|
||||
#if defined __TI_VFP_SUPPORT__
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#elif defined ( __TASKING__ )
|
||||
#if defined __FPU_VFP__
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#elif defined ( __CSMC__ )
|
||||
#if ( __CSMC__ & 0x400U)
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
#include "cmsis_compiler.h" /* CMSIS compiler specific defines */
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __CORE_CM0_H_GENERIC */
|
||||
|
||||
#ifndef __CMSIS_GENERIC
|
||||
|
||||
#ifndef __CORE_CM0_H_DEPENDANT
|
||||
#define __CORE_CM0_H_DEPENDANT
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* check device defines and use defaults */
|
||||
#if defined __CHECK_DEVICE_DEFINES
|
||||
#ifndef __CM0_REV
|
||||
#define __CM0_REV 0x0000U
|
||||
#warning "__CM0_REV not defined in device header file; using default!"
|
||||
#endif
|
||||
|
||||
#ifndef __NVIC_PRIO_BITS
|
||||
#define __NVIC_PRIO_BITS 2U
|
||||
#warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
|
||||
#endif
|
||||
|
||||
#ifndef __Vendor_SysTickConfig
|
||||
#define __Vendor_SysTickConfig 0U
|
||||
#warning "__Vendor_SysTickConfig not defined in device header file; using default!"
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/* IO definitions (access restrictions to peripheral registers) */
|
||||
/**
|
||||
\defgroup CMSIS_glob_defs CMSIS Global Defines
|
||||
|
||||
<strong>IO Type Qualifiers</strong> are used
|
||||
\li to specify the access to peripheral variables.
|
||||
\li for automatic generation of peripheral register debug information.
|
||||
*/
|
||||
#ifdef __cplusplus
|
||||
#define __I volatile /*!< Defines 'read only' permissions */
|
||||
#else
|
||||
#define __I volatile const /*!< Defines 'read only' permissions */
|
||||
#endif
|
||||
#define __O volatile /*!< Defines 'write only' permissions */
|
||||
#define __IO volatile /*!< Defines 'read / write' permissions */
|
||||
|
||||
/* following defines should be used for structure members */
|
||||
#define __IM volatile const /*! Defines 'read only' structure member permissions */
|
||||
#define __OM volatile /*! Defines 'write only' structure member permissions */
|
||||
#define __IOM volatile /*! Defines 'read / write' structure member permissions */
|
||||
|
||||
/*@} end of group Cortex_M0 */
|
||||
|
||||
|
||||
|
||||
/*******************************************************************************
|
||||
* Register Abstraction
|
||||
Core Register contain:
|
||||
- Core Register
|
||||
- Core NVIC Register
|
||||
- Core SCB Register
|
||||
- Core SysTick Register
|
||||
******************************************************************************/
|
||||
/**
|
||||
\defgroup CMSIS_core_register Defines and Type Definitions
|
||||
\brief Type definitions and defines for Cortex-M processor based devices.
|
||||
*/
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_CORE Status and Control Registers
|
||||
\brief Core Register type definitions.
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief Union type to access the Application Program Status Register (APSR).
|
||||
*/
|
||||
typedef union
|
||||
{
|
||||
struct
|
||||
{
|
||||
uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
|
||||
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
|
||||
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
|
||||
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
|
||||
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
|
||||
} b; /*!< Structure used for bit access */
|
||||
uint32_t w; /*!< Type used for word access */
|
||||
} APSR_Type;
|
||||
|
||||
/* APSR Register Definitions */
|
||||
#define APSR_N_Pos 31U /*!< APSR: N Position */
|
||||
#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
|
||||
|
||||
#define APSR_Z_Pos 30U /*!< APSR: Z Position */
|
||||
#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
|
||||
|
||||
#define APSR_C_Pos 29U /*!< APSR: C Position */
|
||||
#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
|
||||
|
||||
#define APSR_V_Pos 28U /*!< APSR: V Position */
|
||||
#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
|
||||
|
||||
|
||||
/**
|
||||
\brief Union type to access the Interrupt Program Status Register (IPSR).
|
||||
*/
|
||||
typedef union
|
||||
{
|
||||
struct
|
||||
{
|
||||
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
|
||||
uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
|
||||
} b; /*!< Structure used for bit access */
|
||||
uint32_t w; /*!< Type used for word access */
|
||||
} IPSR_Type;
|
||||
|
||||
/* IPSR Register Definitions */
|
||||
#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
|
||||
#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
|
||||
|
||||
|
||||
/**
|
||||
\brief Union type to access the Special-Purpose Program Status Registers (xPSR).
|
||||
*/
|
||||
typedef union
|
||||
{
|
||||
struct
|
||||
{
|
||||
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
|
||||
uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
|
||||
uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
|
||||
uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
|
||||
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
|
||||
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
|
||||
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
|
||||
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
|
||||
} b; /*!< Structure used for bit access */
|
||||
uint32_t w; /*!< Type used for word access */
|
||||
} xPSR_Type;
|
||||
|
||||
/* xPSR Register Definitions */
|
||||
#define xPSR_N_Pos 31U /*!< xPSR: N Position */
|
||||
#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
|
||||
|
||||
#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
|
||||
#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
|
||||
|
||||
#define xPSR_C_Pos 29U /*!< xPSR: C Position */
|
||||
#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
|
||||
|
||||
#define xPSR_V_Pos 28U /*!< xPSR: V Position */
|
||||
#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
|
||||
|
||||
#define xPSR_T_Pos 24U /*!< xPSR: T Position */
|
||||
#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
|
||||
|
||||
#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
|
||||
#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
|
||||
|
||||
|
||||
/**
|
||||
\brief Union type to access the Control Registers (CONTROL).
|
||||
*/
|
||||
typedef union
|
||||
{
|
||||
struct
|
||||
{
|
||||
uint32_t _reserved0:1; /*!< bit: 0 Reserved */
|
||||
uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
|
||||
uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
|
||||
} b; /*!< Structure used for bit access */
|
||||
uint32_t w; /*!< Type used for word access */
|
||||
} CONTROL_Type;
|
||||
|
||||
/* CONTROL Register Definitions */
|
||||
#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
|
||||
#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
|
||||
|
||||
/*@} end of group CMSIS_CORE */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
|
||||
\brief Type definitions for the NVIC Registers
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
|
||||
uint32_t RESERVED0[31U];
|
||||
__IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
|
||||
uint32_t RESERVED1[31U];
|
||||
__IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
|
||||
uint32_t RESERVED2[31U];
|
||||
__IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
|
||||
uint32_t RESERVED3[31U];
|
||||
uint32_t RESERVED4[64U];
|
||||
__IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
|
||||
} NVIC_Type;
|
||||
|
||||
/*@} end of group CMSIS_NVIC */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_SCB System Control Block (SCB)
|
||||
\brief Type definitions for the System Control Block Registers
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief Structure type to access the System Control Block (SCB).
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
|
||||
__IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
|
||||
uint32_t RESERVED0;
|
||||
__IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
|
||||
__IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
|
||||
__IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
|
||||
uint32_t RESERVED1;
|
||||
__IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
|
||||
__IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
|
||||
} SCB_Type;
|
||||
|
||||
/* SCB CPUID Register Definitions */
|
||||
#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
|
||||
#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
|
||||
|
||||
#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
|
||||
#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
|
||||
|
||||
#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
|
||||
#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
|
||||
|
||||
#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
|
||||
#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
|
||||
|
||||
#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
|
||||
#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
|
||||
|
||||
/* SCB Interrupt Control State Register Definitions */
|
||||
#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
|
||||
#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
|
||||
|
||||
#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
|
||||
#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
|
||||
|
||||
#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
|
||||
#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
|
||||
|
||||
#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
|
||||
#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
|
||||
|
||||
#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
|
||||
#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
|
||||
|
||||
#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
|
||||
#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
|
||||
|
||||
#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
|
||||
#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
|
||||
|
||||
#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
|
||||
#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
|
||||
|
||||
#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
|
||||
#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
|
||||
|
||||
/* SCB Application Interrupt and Reset Control Register Definitions */
|
||||
#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
|
||||
#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
|
||||
|
||||
#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
|
||||
#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
|
||||
|
||||
#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
|
||||
#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
|
||||
|
||||
#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
|
||||
#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
|
||||
|
||||
#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
|
||||
#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
|
||||
|
||||
/* SCB System Control Register Definitions */
|
||||
#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
|
||||
#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
|
||||
|
||||
#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
|
||||
#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
|
||||
|
||||
#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
|
||||
#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
|
||||
|
||||
/* SCB Configuration Control Register Definitions */
|
||||
#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
|
||||
#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
|
||||
|
||||
#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
|
||||
#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
|
||||
|
||||
/* SCB System Handler Control and State Register Definitions */
|
||||
#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
|
||||
#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
|
||||
|
||||
/*@} end of group CMSIS_SCB */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_SysTick System Tick Timer (SysTick)
|
||||
\brief Type definitions for the System Timer Registers.
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief Structure type to access the System Timer (SysTick).
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
|
||||
__IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
|
||||
__IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
|
||||
__IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
|
||||
} SysTick_Type;
|
||||
|
||||
/* SysTick Control / Status Register Definitions */
|
||||
#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
|
||||
#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
|
||||
|
||||
#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
|
||||
#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
|
||||
|
||||
#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
|
||||
#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
|
||||
|
||||
#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
|
||||
#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
|
||||
|
||||
/* SysTick Reload Register Definitions */
|
||||
#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
|
||||
#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
|
||||
|
||||
/* SysTick Current Register Definitions */
|
||||
#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
|
||||
#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
|
||||
|
||||
/* SysTick Calibration Register Definitions */
|
||||
#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
|
||||
#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
|
||||
|
||||
#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
|
||||
#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
|
||||
|
||||
#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
|
||||
#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
|
||||
|
||||
/*@} end of group CMSIS_SysTick */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
|
||||
\brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
|
||||
Therefore they are not covered by the Cortex-M0 header file.
|
||||
@{
|
||||
*/
|
||||
/*@} end of group CMSIS_CoreDebug */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_core_bitfield Core register bit field macros
|
||||
\brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief Mask and shift a bit field value for use in a register bit range.
|
||||
\param[in] field Name of the register bit field.
|
||||
\param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type.
|
||||
\return Masked and shifted value.
|
||||
*/
|
||||
#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
|
||||
|
||||
/**
|
||||
\brief Mask and shift a register value to extract a bit filed value.
|
||||
\param[in] field Name of the register bit field.
|
||||
\param[in] value Value of register. This parameter is interpreted as an uint32_t type.
|
||||
\return Masked and shifted bit field value.
|
||||
*/
|
||||
#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
|
||||
|
||||
/*@} end of group CMSIS_core_bitfield */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_core_base Core Definitions
|
||||
\brief Definitions for base addresses, unions, and structures.
|
||||
@{
|
||||
*/
|
||||
|
||||
/* Memory mapping of Core Hardware */
|
||||
#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
|
||||
#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
|
||||
#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
|
||||
#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
|
||||
|
||||
#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
|
||||
#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
|
||||
#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
|
||||
|
||||
|
||||
/*@} */
|
||||
|
||||
|
||||
|
||||
/*******************************************************************************
|
||||
* Hardware Abstraction Layer
|
||||
Core Function Interface contains:
|
||||
- Core NVIC Functions
|
||||
- Core SysTick Functions
|
||||
- Core Register Access Functions
|
||||
******************************************************************************/
|
||||
/**
|
||||
\defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
|
||||
*/
|
||||
|
||||
|
||||
|
||||
/* ########################## NVIC functions #################################### */
|
||||
/**
|
||||
\ingroup CMSIS_Core_FunctionInterface
|
||||
\defgroup CMSIS_Core_NVICFunctions NVIC Functions
|
||||
\brief Functions that manage interrupts and exceptions via the NVIC.
|
||||
@{
|
||||
*/
|
||||
|
||||
#ifdef CMSIS_NVIC_VIRTUAL
|
||||
#ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
|
||||
#define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
|
||||
#endif
|
||||
#include CMSIS_NVIC_VIRTUAL_HEADER_FILE
|
||||
#else
|
||||
#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping
|
||||
#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping
|
||||
#define NVIC_EnableIRQ __NVIC_EnableIRQ
|
||||
#define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ
|
||||
#define NVIC_DisableIRQ __NVIC_DisableIRQ
|
||||
#define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ
|
||||
#define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ
|
||||
#define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ
|
||||
/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M0 */
|
||||
#define NVIC_SetPriority __NVIC_SetPriority
|
||||
#define NVIC_GetPriority __NVIC_GetPriority
|
||||
#define NVIC_SystemReset __NVIC_SystemReset
|
||||
#endif /* CMSIS_NVIC_VIRTUAL */
|
||||
|
||||
#ifdef CMSIS_VECTAB_VIRTUAL
|
||||
#ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
|
||||
#define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
|
||||
#endif
|
||||
#include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
|
||||
#else
|
||||
#define NVIC_SetVector __NVIC_SetVector
|
||||
#define NVIC_GetVector __NVIC_GetVector
|
||||
#endif /* (CMSIS_VECTAB_VIRTUAL) */
|
||||
|
||||
#define NVIC_USER_IRQ_OFFSET 16
|
||||
|
||||
|
||||
/* The following EXC_RETURN values are saved the LR on exception entry */
|
||||
#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */
|
||||
#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */
|
||||
#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */
|
||||
|
||||
|
||||
/* Interrupt Priorities are WORD accessible only under Armv6-M */
|
||||
/* The following MACROS handle generation of the register offset and byte masks */
|
||||
#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
|
||||
#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
|
||||
#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
|
||||
|
||||
#define __NVIC_SetPriorityGrouping(X) (void)(X)
|
||||
#define __NVIC_GetPriorityGrouping() (0U)
|
||||
|
||||
/**
|
||||
\brief Enable Interrupt
|
||||
\details Enables a device specific interrupt in the NVIC interrupt controller.
|
||||
\param [in] IRQn Device specific interrupt number.
|
||||
\note IRQn must not be negative.
|
||||
*/
|
||||
__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
__COMPILER_BARRIER();
|
||||
NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
|
||||
__COMPILER_BARRIER();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Interrupt Enable status
|
||||
\details Returns a device specific interrupt enable status from the NVIC interrupt controller.
|
||||
\param [in] IRQn Device specific interrupt number.
|
||||
\return 0 Interrupt is not enabled.
|
||||
\return 1 Interrupt is enabled.
|
||||
\note IRQn must not be negative.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
|
||||
}
|
||||
else
|
||||
{
|
||||
return(0U);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Disable Interrupt
|
||||
\details Disables a device specific interrupt in the NVIC interrupt controller.
|
||||
\param [in] IRQn Device specific interrupt number.
|
||||
\note IRQn must not be negative.
|
||||
*/
|
||||
__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
|
||||
__DSB();
|
||||
__ISB();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Pending Interrupt
|
||||
\details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
|
||||
\param [in] IRQn Device specific interrupt number.
|
||||
\return 0 Interrupt status is not pending.
|
||||
\return 1 Interrupt status is pending.
|
||||
\note IRQn must not be negative.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
|
||||
}
|
||||
else
|
||||
{
|
||||
return(0U);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Pending Interrupt
|
||||
\details Sets the pending bit of a device specific interrupt in the NVIC pending register.
|
||||
\param [in] IRQn Device specific interrupt number.
|
||||
\note IRQn must not be negative.
|
||||
*/
|
||||
__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Clear Pending Interrupt
|
||||
\details Clears the pending bit of a device specific interrupt in the NVIC pending register.
|
||||
\param [in] IRQn Device specific interrupt number.
|
||||
\note IRQn must not be negative.
|
||||
*/
|
||||
__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Interrupt Priority
|
||||
\details Sets the priority of a device specific interrupt or a processor exception.
|
||||
The interrupt number can be positive to specify a device specific interrupt,
|
||||
or negative to specify a processor exception.
|
||||
\param [in] IRQn Interrupt number.
|
||||
\param [in] priority Priority to set.
|
||||
\note The priority cannot be set for every processor exception.
|
||||
*/
|
||||
__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
|
||||
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
|
||||
}
|
||||
else
|
||||
{
|
||||
SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
|
||||
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Interrupt Priority
|
||||
\details Reads the priority of a device specific interrupt or a processor exception.
|
||||
The interrupt number can be positive to specify a device specific interrupt,
|
||||
or negative to specify a processor exception.
|
||||
\param [in] IRQn Interrupt number.
|
||||
\return Interrupt Priority.
|
||||
Value is aligned automatically to the implemented priority bits of the microcontroller.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
|
||||
{
|
||||
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
|
||||
}
|
||||
else
|
||||
{
|
||||
return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Encode Priority
|
||||
\details Encodes the priority for an interrupt with the given priority group,
|
||||
preemptive priority value, and subpriority value.
|
||||
In case of a conflict between priority grouping and available
|
||||
priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
|
||||
\param [in] PriorityGroup Used priority group.
|
||||
\param [in] PreemptPriority Preemptive priority value (starting from 0).
|
||||
\param [in] SubPriority Subpriority value (starting from 0).
|
||||
\return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
|
||||
*/
|
||||
__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
|
||||
{
|
||||
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
|
||||
uint32_t PreemptPriorityBits;
|
||||
uint32_t SubPriorityBits;
|
||||
|
||||
PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
|
||||
SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
|
||||
|
||||
return (
|
||||
((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
|
||||
((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
|
||||
);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Decode Priority
|
||||
\details Decodes an interrupt priority value with a given priority group to
|
||||
preemptive priority value and subpriority value.
|
||||
In case of a conflict between priority grouping and available
|
||||
priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
|
||||
\param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
|
||||
\param [in] PriorityGroup Used priority group.
|
||||
\param [out] pPreemptPriority Preemptive priority value (starting from 0).
|
||||
\param [out] pSubPriority Subpriority value (starting from 0).
|
||||
*/
|
||||
__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
|
||||
{
|
||||
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
|
||||
uint32_t PreemptPriorityBits;
|
||||
uint32_t SubPriorityBits;
|
||||
|
||||
PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
|
||||
SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
|
||||
|
||||
*pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
|
||||
*pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
|
||||
}
|
||||
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Interrupt Vector
|
||||
\details Sets an interrupt vector in SRAM based interrupt vector table.
|
||||
The interrupt number can be positive to specify a device specific interrupt,
|
||||
or negative to specify a processor exception.
|
||||
Address 0 must be mapped to SRAM.
|
||||
\param [in] IRQn Interrupt number
|
||||
\param [in] vector Address of interrupt handler function
|
||||
*/
|
||||
__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
|
||||
{
|
||||
uint32_t *vectors = (uint32_t *)(NVIC_USER_IRQ_OFFSET << 2); /* point to 1st user interrupt */
|
||||
*(vectors + (int32_t)IRQn) = vector; /* use pointer arithmetic to access vector */
|
||||
/* ARM Application Note 321 states that the M0 does not require the architectural barrier */
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Interrupt Vector
|
||||
\details Reads an interrupt vector from interrupt vector table.
|
||||
The interrupt number can be positive to specify a device specific interrupt,
|
||||
or negative to specify a processor exception.
|
||||
\param [in] IRQn Interrupt number.
|
||||
\return Address of interrupt handler function
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
|
||||
{
|
||||
uint32_t *vectors = (uint32_t *)(NVIC_USER_IRQ_OFFSET << 2); /* point to 1st user interrupt */
|
||||
return *(vectors + (int32_t)IRQn); /* use pointer arithmetic to access vector */
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief System Reset
|
||||
\details Initiates a system reset request to reset the MCU.
|
||||
*/
|
||||
__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
|
||||
{
|
||||
__DSB(); /* Ensure all outstanding memory accesses included
|
||||
buffered write are completed before reset */
|
||||
SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
|
||||
SCB_AIRCR_SYSRESETREQ_Msk);
|
||||
__DSB(); /* Ensure completion of memory access */
|
||||
|
||||
for(;;) /* wait until reset */
|
||||
{
|
||||
__NOP();
|
||||
}
|
||||
}
|
||||
|
||||
/*@} end of CMSIS_Core_NVICFunctions */
|
||||
|
||||
|
||||
/* ########################## FPU functions #################################### */
|
||||
/**
|
||||
\ingroup CMSIS_Core_FunctionInterface
|
||||
\defgroup CMSIS_Core_FpuFunctions FPU Functions
|
||||
\brief Function that provides FPU type.
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief get FPU type
|
||||
\details returns the FPU type
|
||||
\returns
|
||||
- \b 0: No FPU
|
||||
- \b 1: Single precision FPU
|
||||
- \b 2: Double + Single precision FPU
|
||||
*/
|
||||
__STATIC_INLINE uint32_t SCB_GetFPUType(void)
|
||||
{
|
||||
return 0U; /* No FPU */
|
||||
}
|
||||
|
||||
|
||||
/*@} end of CMSIS_Core_FpuFunctions */
|
||||
|
||||
|
||||
|
||||
/* ################################## SysTick function ############################################ */
|
||||
/**
|
||||
\ingroup CMSIS_Core_FunctionInterface
|
||||
\defgroup CMSIS_Core_SysTickFunctions SysTick Functions
|
||||
\brief Functions that configure the System.
|
||||
@{
|
||||
*/
|
||||
|
||||
#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
|
||||
|
||||
/**
|
||||
\brief System Tick Configuration
|
||||
\details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
|
||||
Counter is in free running mode to generate periodic interrupts.
|
||||
\param [in] ticks Number of ticks between two interrupts.
|
||||
\return 0 Function succeeded.
|
||||
\return 1 Function failed.
|
||||
\note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
|
||||
function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
|
||||
must contain a vendor-specific implementation of this function.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
|
||||
{
|
||||
if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
|
||||
{
|
||||
return (1UL); /* Reload value impossible */
|
||||
}
|
||||
|
||||
SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
|
||||
NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
|
||||
SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
|
||||
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
|
||||
SysTick_CTRL_TICKINT_Msk |
|
||||
SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
|
||||
return (0UL); /* Function successful */
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
/*@} end of CMSIS_Core_SysTickFunctions */
|
||||
|
||||
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __CORE_CM0_H_DEPENDANT */
|
||||
|
||||
#endif /* __CMSIS_GENERIC */
|
||||
@@ -0,0 +1,979 @@
|
||||
/**************************************************************************//**
|
||||
* @file core_cm1.h
|
||||
* @brief CMSIS Cortex-M1 Core Peripheral Access Layer Header File
|
||||
* @version V1.0.1
|
||||
* @date 12. November 2018
|
||||
******************************************************************************/
|
||||
/*
|
||||
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the License); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*/
|
||||
|
||||
#if defined ( __ICCARM__ )
|
||||
#pragma system_include /* treat file as system include file for MISRA check */
|
||||
#elif defined (__clang__)
|
||||
#pragma clang system_header /* treat file as system include file */
|
||||
#endif
|
||||
|
||||
#ifndef __CORE_CM1_H_GENERIC
|
||||
#define __CORE_CM1_H_GENERIC
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/**
|
||||
\page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
|
||||
CMSIS violates the following MISRA-C:2004 rules:
|
||||
|
||||
\li Required Rule 8.5, object/function definition in header file.<br>
|
||||
Function definitions in header files are used to allow 'inlining'.
|
||||
|
||||
\li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
|
||||
Unions are used for effective representation of core registers.
|
||||
|
||||
\li Advisory Rule 19.7, Function-like macro defined.<br>
|
||||
Function-like macros are used to allow more efficient code.
|
||||
*/
|
||||
|
||||
|
||||
/*******************************************************************************
|
||||
* CMSIS definitions
|
||||
******************************************************************************/
|
||||
/**
|
||||
\ingroup Cortex_M1
|
||||
@{
|
||||
*/
|
||||
|
||||
#include "cmsis_version.h"
|
||||
|
||||
/* CMSIS CM1 definitions */
|
||||
#define __CM1_CMSIS_VERSION_MAIN (__CM_CMSIS_VERSION_MAIN) /*!< \deprecated [31:16] CMSIS HAL main version */
|
||||
#define __CM1_CMSIS_VERSION_SUB (__CM_CMSIS_VERSION_SUB) /*!< \deprecated [15:0] CMSIS HAL sub version */
|
||||
#define __CM1_CMSIS_VERSION ((__CM1_CMSIS_VERSION_MAIN << 16U) | \
|
||||
__CM1_CMSIS_VERSION_SUB ) /*!< \deprecated CMSIS HAL version number */
|
||||
|
||||
#define __CORTEX_M (1U) /*!< Cortex-M Core */
|
||||
|
||||
/** __FPU_USED indicates whether an FPU is used or not.
|
||||
This core does not support an FPU at all
|
||||
*/
|
||||
#define __FPU_USED 0U
|
||||
|
||||
#if defined ( __CC_ARM )
|
||||
#if defined __TARGET_FPU_VFP
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
|
||||
#if defined __ARM_FP
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#elif defined ( __GNUC__ )
|
||||
#if defined (__VFP_FP__) && !defined(__SOFTFP__)
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#elif defined ( __ICCARM__ )
|
||||
#if defined __ARMVFP__
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#elif defined ( __TI_ARM__ )
|
||||
#if defined __TI_VFP_SUPPORT__
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#elif defined ( __TASKING__ )
|
||||
#if defined __FPU_VFP__
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#elif defined ( __CSMC__ )
|
||||
#if ( __CSMC__ & 0x400U)
|
||||
#error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
#include "cmsis_compiler.h" /* CMSIS compiler specific defines */
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __CORE_CM1_H_GENERIC */
|
||||
|
||||
#ifndef __CMSIS_GENERIC
|
||||
|
||||
#ifndef __CORE_CM1_H_DEPENDANT
|
||||
#define __CORE_CM1_H_DEPENDANT
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* check device defines and use defaults */
|
||||
#if defined __CHECK_DEVICE_DEFINES
|
||||
#ifndef __CM1_REV
|
||||
#define __CM1_REV 0x0100U
|
||||
#warning "__CM1_REV not defined in device header file; using default!"
|
||||
#endif
|
||||
|
||||
#ifndef __NVIC_PRIO_BITS
|
||||
#define __NVIC_PRIO_BITS 2U
|
||||
#warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
|
||||
#endif
|
||||
|
||||
#ifndef __Vendor_SysTickConfig
|
||||
#define __Vendor_SysTickConfig 0U
|
||||
#warning "__Vendor_SysTickConfig not defined in device header file; using default!"
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/* IO definitions (access restrictions to peripheral registers) */
|
||||
/**
|
||||
\defgroup CMSIS_glob_defs CMSIS Global Defines
|
||||
|
||||
<strong>IO Type Qualifiers</strong> are used
|
||||
\li to specify the access to peripheral variables.
|
||||
\li for automatic generation of peripheral register debug information.
|
||||
*/
|
||||
#ifdef __cplusplus
|
||||
#define __I volatile /*!< Defines 'read only' permissions */
|
||||
#else
|
||||
#define __I volatile const /*!< Defines 'read only' permissions */
|
||||
#endif
|
||||
#define __O volatile /*!< Defines 'write only' permissions */
|
||||
#define __IO volatile /*!< Defines 'read / write' permissions */
|
||||
|
||||
/* following defines should be used for structure members */
|
||||
#define __IM volatile const /*! Defines 'read only' structure member permissions */
|
||||
#define __OM volatile /*! Defines 'write only' structure member permissions */
|
||||
#define __IOM volatile /*! Defines 'read / write' structure member permissions */
|
||||
|
||||
/*@} end of group Cortex_M1 */
|
||||
|
||||
|
||||
|
||||
/*******************************************************************************
|
||||
* Register Abstraction
|
||||
Core Register contain:
|
||||
- Core Register
|
||||
- Core NVIC Register
|
||||
- Core SCB Register
|
||||
- Core SysTick Register
|
||||
******************************************************************************/
|
||||
/**
|
||||
\defgroup CMSIS_core_register Defines and Type Definitions
|
||||
\brief Type definitions and defines for Cortex-M processor based devices.
|
||||
*/
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_CORE Status and Control Registers
|
||||
\brief Core Register type definitions.
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief Union type to access the Application Program Status Register (APSR).
|
||||
*/
|
||||
typedef union
|
||||
{
|
||||
struct
|
||||
{
|
||||
uint32_t _reserved0:28; /*!< bit: 0..27 Reserved */
|
||||
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
|
||||
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
|
||||
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
|
||||
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
|
||||
} b; /*!< Structure used for bit access */
|
||||
uint32_t w; /*!< Type used for word access */
|
||||
} APSR_Type;
|
||||
|
||||
/* APSR Register Definitions */
|
||||
#define APSR_N_Pos 31U /*!< APSR: N Position */
|
||||
#define APSR_N_Msk (1UL << APSR_N_Pos) /*!< APSR: N Mask */
|
||||
|
||||
#define APSR_Z_Pos 30U /*!< APSR: Z Position */
|
||||
#define APSR_Z_Msk (1UL << APSR_Z_Pos) /*!< APSR: Z Mask */
|
||||
|
||||
#define APSR_C_Pos 29U /*!< APSR: C Position */
|
||||
#define APSR_C_Msk (1UL << APSR_C_Pos) /*!< APSR: C Mask */
|
||||
|
||||
#define APSR_V_Pos 28U /*!< APSR: V Position */
|
||||
#define APSR_V_Msk (1UL << APSR_V_Pos) /*!< APSR: V Mask */
|
||||
|
||||
|
||||
/**
|
||||
\brief Union type to access the Interrupt Program Status Register (IPSR).
|
||||
*/
|
||||
typedef union
|
||||
{
|
||||
struct
|
||||
{
|
||||
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
|
||||
uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
|
||||
} b; /*!< Structure used for bit access */
|
||||
uint32_t w; /*!< Type used for word access */
|
||||
} IPSR_Type;
|
||||
|
||||
/* IPSR Register Definitions */
|
||||
#define IPSR_ISR_Pos 0U /*!< IPSR: ISR Position */
|
||||
#define IPSR_ISR_Msk (0x1FFUL /*<< IPSR_ISR_Pos*/) /*!< IPSR: ISR Mask */
|
||||
|
||||
|
||||
/**
|
||||
\brief Union type to access the Special-Purpose Program Status Registers (xPSR).
|
||||
*/
|
||||
typedef union
|
||||
{
|
||||
struct
|
||||
{
|
||||
uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
|
||||
uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
|
||||
uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
|
||||
uint32_t _reserved1:3; /*!< bit: 25..27 Reserved */
|
||||
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
|
||||
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
|
||||
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
|
||||
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
|
||||
} b; /*!< Structure used for bit access */
|
||||
uint32_t w; /*!< Type used for word access */
|
||||
} xPSR_Type;
|
||||
|
||||
/* xPSR Register Definitions */
|
||||
#define xPSR_N_Pos 31U /*!< xPSR: N Position */
|
||||
#define xPSR_N_Msk (1UL << xPSR_N_Pos) /*!< xPSR: N Mask */
|
||||
|
||||
#define xPSR_Z_Pos 30U /*!< xPSR: Z Position */
|
||||
#define xPSR_Z_Msk (1UL << xPSR_Z_Pos) /*!< xPSR: Z Mask */
|
||||
|
||||
#define xPSR_C_Pos 29U /*!< xPSR: C Position */
|
||||
#define xPSR_C_Msk (1UL << xPSR_C_Pos) /*!< xPSR: C Mask */
|
||||
|
||||
#define xPSR_V_Pos 28U /*!< xPSR: V Position */
|
||||
#define xPSR_V_Msk (1UL << xPSR_V_Pos) /*!< xPSR: V Mask */
|
||||
|
||||
#define xPSR_T_Pos 24U /*!< xPSR: T Position */
|
||||
#define xPSR_T_Msk (1UL << xPSR_T_Pos) /*!< xPSR: T Mask */
|
||||
|
||||
#define xPSR_ISR_Pos 0U /*!< xPSR: ISR Position */
|
||||
#define xPSR_ISR_Msk (0x1FFUL /*<< xPSR_ISR_Pos*/) /*!< xPSR: ISR Mask */
|
||||
|
||||
|
||||
/**
|
||||
\brief Union type to access the Control Registers (CONTROL).
|
||||
*/
|
||||
typedef union
|
||||
{
|
||||
struct
|
||||
{
|
||||
uint32_t _reserved0:1; /*!< bit: 0 Reserved */
|
||||
uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
|
||||
uint32_t _reserved1:30; /*!< bit: 2..31 Reserved */
|
||||
} b; /*!< Structure used for bit access */
|
||||
uint32_t w; /*!< Type used for word access */
|
||||
} CONTROL_Type;
|
||||
|
||||
/* CONTROL Register Definitions */
|
||||
#define CONTROL_SPSEL_Pos 1U /*!< CONTROL: SPSEL Position */
|
||||
#define CONTROL_SPSEL_Msk (1UL << CONTROL_SPSEL_Pos) /*!< CONTROL: SPSEL Mask */
|
||||
|
||||
/*@} end of group CMSIS_CORE */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
|
||||
\brief Type definitions for the NVIC Registers
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IOM uint32_t ISER[1U]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
|
||||
uint32_t RESERVED0[31U];
|
||||
__IOM uint32_t ICER[1U]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
|
||||
uint32_t RSERVED1[31U];
|
||||
__IOM uint32_t ISPR[1U]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
|
||||
uint32_t RESERVED2[31U];
|
||||
__IOM uint32_t ICPR[1U]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
|
||||
uint32_t RESERVED3[31U];
|
||||
uint32_t RESERVED4[64U];
|
||||
__IOM uint32_t IP[8U]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
|
||||
} NVIC_Type;
|
||||
|
||||
/*@} end of group CMSIS_NVIC */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_SCB System Control Block (SCB)
|
||||
\brief Type definitions for the System Control Block Registers
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief Structure type to access the System Control Block (SCB).
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IM uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
|
||||
__IOM uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
|
||||
uint32_t RESERVED0;
|
||||
__IOM uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
|
||||
__IOM uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
|
||||
__IOM uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
|
||||
uint32_t RESERVED1;
|
||||
__IOM uint32_t SHP[2U]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
|
||||
__IOM uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
|
||||
} SCB_Type;
|
||||
|
||||
/* SCB CPUID Register Definitions */
|
||||
#define SCB_CPUID_IMPLEMENTER_Pos 24U /*!< SCB CPUID: IMPLEMENTER Position */
|
||||
#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
|
||||
|
||||
#define SCB_CPUID_VARIANT_Pos 20U /*!< SCB CPUID: VARIANT Position */
|
||||
#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
|
||||
|
||||
#define SCB_CPUID_ARCHITECTURE_Pos 16U /*!< SCB CPUID: ARCHITECTURE Position */
|
||||
#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
|
||||
|
||||
#define SCB_CPUID_PARTNO_Pos 4U /*!< SCB CPUID: PARTNO Position */
|
||||
#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
|
||||
|
||||
#define SCB_CPUID_REVISION_Pos 0U /*!< SCB CPUID: REVISION Position */
|
||||
#define SCB_CPUID_REVISION_Msk (0xFUL /*<< SCB_CPUID_REVISION_Pos*/) /*!< SCB CPUID: REVISION Mask */
|
||||
|
||||
/* SCB Interrupt Control State Register Definitions */
|
||||
#define SCB_ICSR_NMIPENDSET_Pos 31U /*!< SCB ICSR: NMIPENDSET Position */
|
||||
#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
|
||||
|
||||
#define SCB_ICSR_PENDSVSET_Pos 28U /*!< SCB ICSR: PENDSVSET Position */
|
||||
#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
|
||||
|
||||
#define SCB_ICSR_PENDSVCLR_Pos 27U /*!< SCB ICSR: PENDSVCLR Position */
|
||||
#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
|
||||
|
||||
#define SCB_ICSR_PENDSTSET_Pos 26U /*!< SCB ICSR: PENDSTSET Position */
|
||||
#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
|
||||
|
||||
#define SCB_ICSR_PENDSTCLR_Pos 25U /*!< SCB ICSR: PENDSTCLR Position */
|
||||
#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
|
||||
|
||||
#define SCB_ICSR_ISRPREEMPT_Pos 23U /*!< SCB ICSR: ISRPREEMPT Position */
|
||||
#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
|
||||
|
||||
#define SCB_ICSR_ISRPENDING_Pos 22U /*!< SCB ICSR: ISRPENDING Position */
|
||||
#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
|
||||
|
||||
#define SCB_ICSR_VECTPENDING_Pos 12U /*!< SCB ICSR: VECTPENDING Position */
|
||||
#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
|
||||
|
||||
#define SCB_ICSR_VECTACTIVE_Pos 0U /*!< SCB ICSR: VECTACTIVE Position */
|
||||
#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/) /*!< SCB ICSR: VECTACTIVE Mask */
|
||||
|
||||
/* SCB Application Interrupt and Reset Control Register Definitions */
|
||||
#define SCB_AIRCR_VECTKEY_Pos 16U /*!< SCB AIRCR: VECTKEY Position */
|
||||
#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
|
||||
|
||||
#define SCB_AIRCR_VECTKEYSTAT_Pos 16U /*!< SCB AIRCR: VECTKEYSTAT Position */
|
||||
#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
|
||||
|
||||
#define SCB_AIRCR_ENDIANESS_Pos 15U /*!< SCB AIRCR: ENDIANESS Position */
|
||||
#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
|
||||
|
||||
#define SCB_AIRCR_SYSRESETREQ_Pos 2U /*!< SCB AIRCR: SYSRESETREQ Position */
|
||||
#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
|
||||
|
||||
#define SCB_AIRCR_VECTCLRACTIVE_Pos 1U /*!< SCB AIRCR: VECTCLRACTIVE Position */
|
||||
#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
|
||||
|
||||
/* SCB System Control Register Definitions */
|
||||
#define SCB_SCR_SEVONPEND_Pos 4U /*!< SCB SCR: SEVONPEND Position */
|
||||
#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
|
||||
|
||||
#define SCB_SCR_SLEEPDEEP_Pos 2U /*!< SCB SCR: SLEEPDEEP Position */
|
||||
#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
|
||||
|
||||
#define SCB_SCR_SLEEPONEXIT_Pos 1U /*!< SCB SCR: SLEEPONEXIT Position */
|
||||
#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
|
||||
|
||||
/* SCB Configuration Control Register Definitions */
|
||||
#define SCB_CCR_STKALIGN_Pos 9U /*!< SCB CCR: STKALIGN Position */
|
||||
#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
|
||||
|
||||
#define SCB_CCR_UNALIGN_TRP_Pos 3U /*!< SCB CCR: UNALIGN_TRP Position */
|
||||
#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
|
||||
|
||||
/* SCB System Handler Control and State Register Definitions */
|
||||
#define SCB_SHCSR_SVCALLPENDED_Pos 15U /*!< SCB SHCSR: SVCALLPENDED Position */
|
||||
#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
|
||||
|
||||
/*@} end of group CMSIS_SCB */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
|
||||
\brief Type definitions for the System Control and ID Register not in the SCB
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief Structure type to access the System Control and ID Register not in the SCB.
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t RESERVED0[2U];
|
||||
__IOM uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
|
||||
} SCnSCB_Type;
|
||||
|
||||
/* Auxiliary Control Register Definitions */
|
||||
#define SCnSCB_ACTLR_ITCMUAEN_Pos 4U /*!< ACTLR: Instruction TCM Upper Alias Enable Position */
|
||||
#define SCnSCB_ACTLR_ITCMUAEN_Msk (1UL << SCnSCB_ACTLR_ITCMUAEN_Pos) /*!< ACTLR: Instruction TCM Upper Alias Enable Mask */
|
||||
|
||||
#define SCnSCB_ACTLR_ITCMLAEN_Pos 3U /*!< ACTLR: Instruction TCM Lower Alias Enable Position */
|
||||
#define SCnSCB_ACTLR_ITCMLAEN_Msk (1UL << SCnSCB_ACTLR_ITCMLAEN_Pos) /*!< ACTLR: Instruction TCM Lower Alias Enable Mask */
|
||||
|
||||
/*@} end of group CMSIS_SCnotSCB */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_SysTick System Tick Timer (SysTick)
|
||||
\brief Type definitions for the System Timer Registers.
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief Structure type to access the System Timer (SysTick).
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
__IOM uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
|
||||
__IOM uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
|
||||
__IOM uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
|
||||
__IM uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
|
||||
} SysTick_Type;
|
||||
|
||||
/* SysTick Control / Status Register Definitions */
|
||||
#define SysTick_CTRL_COUNTFLAG_Pos 16U /*!< SysTick CTRL: COUNTFLAG Position */
|
||||
#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
|
||||
|
||||
#define SysTick_CTRL_CLKSOURCE_Pos 2U /*!< SysTick CTRL: CLKSOURCE Position */
|
||||
#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
|
||||
|
||||
#define SysTick_CTRL_TICKINT_Pos 1U /*!< SysTick CTRL: TICKINT Position */
|
||||
#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
|
||||
|
||||
#define SysTick_CTRL_ENABLE_Pos 0U /*!< SysTick CTRL: ENABLE Position */
|
||||
#define SysTick_CTRL_ENABLE_Msk (1UL /*<< SysTick_CTRL_ENABLE_Pos*/) /*!< SysTick CTRL: ENABLE Mask */
|
||||
|
||||
/* SysTick Reload Register Definitions */
|
||||
#define SysTick_LOAD_RELOAD_Pos 0U /*!< SysTick LOAD: RELOAD Position */
|
||||
#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/) /*!< SysTick LOAD: RELOAD Mask */
|
||||
|
||||
/* SysTick Current Register Definitions */
|
||||
#define SysTick_VAL_CURRENT_Pos 0U /*!< SysTick VAL: CURRENT Position */
|
||||
#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/) /*!< SysTick VAL: CURRENT Mask */
|
||||
|
||||
/* SysTick Calibration Register Definitions */
|
||||
#define SysTick_CALIB_NOREF_Pos 31U /*!< SysTick CALIB: NOREF Position */
|
||||
#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
|
||||
|
||||
#define SysTick_CALIB_SKEW_Pos 30U /*!< SysTick CALIB: SKEW Position */
|
||||
#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
|
||||
|
||||
#define SysTick_CALIB_TENMS_Pos 0U /*!< SysTick CALIB: TENMS Position */
|
||||
#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/) /*!< SysTick CALIB: TENMS Mask */
|
||||
|
||||
/*@} end of group CMSIS_SysTick */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
|
||||
\brief Cortex-M1 Core Debug Registers (DCB registers, SHCSR, and DFSR) are only accessible over DAP and not via processor.
|
||||
Therefore they are not covered by the Cortex-M1 header file.
|
||||
@{
|
||||
*/
|
||||
/*@} end of group CMSIS_CoreDebug */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_core_bitfield Core register bit field macros
|
||||
\brief Macros for use with bit field definitions (xxx_Pos, xxx_Msk).
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief Mask and shift a bit field value for use in a register bit range.
|
||||
\param[in] field Name of the register bit field.
|
||||
\param[in] value Value of the bit field. This parameter is interpreted as an uint32_t type.
|
||||
\return Masked and shifted value.
|
||||
*/
|
||||
#define _VAL2FLD(field, value) (((uint32_t)(value) << field ## _Pos) & field ## _Msk)
|
||||
|
||||
/**
|
||||
\brief Mask and shift a register value to extract a bit filed value.
|
||||
\param[in] field Name of the register bit field.
|
||||
\param[in] value Value of register. This parameter is interpreted as an uint32_t type.
|
||||
\return Masked and shifted bit field value.
|
||||
*/
|
||||
#define _FLD2VAL(field, value) (((uint32_t)(value) & field ## _Msk) >> field ## _Pos)
|
||||
|
||||
/*@} end of group CMSIS_core_bitfield */
|
||||
|
||||
|
||||
/**
|
||||
\ingroup CMSIS_core_register
|
||||
\defgroup CMSIS_core_base Core Definitions
|
||||
\brief Definitions for base addresses, unions, and structures.
|
||||
@{
|
||||
*/
|
||||
|
||||
/* Memory mapping of Core Hardware */
|
||||
#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
|
||||
#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
|
||||
#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
|
||||
#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
|
||||
|
||||
#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
|
||||
#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
|
||||
#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
|
||||
#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
|
||||
|
||||
|
||||
/*@} */
|
||||
|
||||
|
||||
|
||||
/*******************************************************************************
|
||||
* Hardware Abstraction Layer
|
||||
Core Function Interface contains:
|
||||
- Core NVIC Functions
|
||||
- Core SysTick Functions
|
||||
- Core Register Access Functions
|
||||
******************************************************************************/
|
||||
/**
|
||||
\defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
|
||||
*/
|
||||
|
||||
|
||||
|
||||
/* ########################## NVIC functions #################################### */
|
||||
/**
|
||||
\ingroup CMSIS_Core_FunctionInterface
|
||||
\defgroup CMSIS_Core_NVICFunctions NVIC Functions
|
||||
\brief Functions that manage interrupts and exceptions via the NVIC.
|
||||
@{
|
||||
*/
|
||||
|
||||
#ifdef CMSIS_NVIC_VIRTUAL
|
||||
#ifndef CMSIS_NVIC_VIRTUAL_HEADER_FILE
|
||||
#define CMSIS_NVIC_VIRTUAL_HEADER_FILE "cmsis_nvic_virtual.h"
|
||||
#endif
|
||||
#include CMSIS_NVIC_VIRTUAL_HEADER_FILE
|
||||
#else
|
||||
#define NVIC_SetPriorityGrouping __NVIC_SetPriorityGrouping
|
||||
#define NVIC_GetPriorityGrouping __NVIC_GetPriorityGrouping
|
||||
#define NVIC_EnableIRQ __NVIC_EnableIRQ
|
||||
#define NVIC_GetEnableIRQ __NVIC_GetEnableIRQ
|
||||
#define NVIC_DisableIRQ __NVIC_DisableIRQ
|
||||
#define NVIC_GetPendingIRQ __NVIC_GetPendingIRQ
|
||||
#define NVIC_SetPendingIRQ __NVIC_SetPendingIRQ
|
||||
#define NVIC_ClearPendingIRQ __NVIC_ClearPendingIRQ
|
||||
/*#define NVIC_GetActive __NVIC_GetActive not available for Cortex-M1 */
|
||||
#define NVIC_SetPriority __NVIC_SetPriority
|
||||
#define NVIC_GetPriority __NVIC_GetPriority
|
||||
#define NVIC_SystemReset __NVIC_SystemReset
|
||||
#endif /* CMSIS_NVIC_VIRTUAL */
|
||||
|
||||
#ifdef CMSIS_VECTAB_VIRTUAL
|
||||
#ifndef CMSIS_VECTAB_VIRTUAL_HEADER_FILE
|
||||
#define CMSIS_VECTAB_VIRTUAL_HEADER_FILE "cmsis_vectab_virtual.h"
|
||||
#endif
|
||||
#include CMSIS_VECTAB_VIRTUAL_HEADER_FILE
|
||||
#else
|
||||
#define NVIC_SetVector __NVIC_SetVector
|
||||
#define NVIC_GetVector __NVIC_GetVector
|
||||
#endif /* (CMSIS_VECTAB_VIRTUAL) */
|
||||
|
||||
#define NVIC_USER_IRQ_OFFSET 16
|
||||
|
||||
|
||||
/* The following EXC_RETURN values are saved the LR on exception entry */
|
||||
#define EXC_RETURN_HANDLER (0xFFFFFFF1UL) /* return to Handler mode, uses MSP after return */
|
||||
#define EXC_RETURN_THREAD_MSP (0xFFFFFFF9UL) /* return to Thread mode, uses MSP after return */
|
||||
#define EXC_RETURN_THREAD_PSP (0xFFFFFFFDUL) /* return to Thread mode, uses PSP after return */
|
||||
|
||||
|
||||
/* Interrupt Priorities are WORD accessible only under Armv6-M */
|
||||
/* The following MACROS handle generation of the register offset and byte masks */
|
||||
#define _BIT_SHIFT(IRQn) ( ((((uint32_t)(int32_t)(IRQn)) ) & 0x03UL) * 8UL)
|
||||
#define _SHP_IDX(IRQn) ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >> 2UL) )
|
||||
#define _IP_IDX(IRQn) ( (((uint32_t)(int32_t)(IRQn)) >> 2UL) )
|
||||
|
||||
#define __NVIC_SetPriorityGrouping(X) (void)(X)
|
||||
#define __NVIC_GetPriorityGrouping() (0U)
|
||||
|
||||
/**
|
||||
\brief Enable Interrupt
|
||||
\details Enables a device specific interrupt in the NVIC interrupt controller.
|
||||
\param [in] IRQn Device specific interrupt number.
|
||||
\note IRQn must not be negative.
|
||||
*/
|
||||
__STATIC_INLINE void __NVIC_EnableIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
__COMPILER_BARRIER();
|
||||
NVIC->ISER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
|
||||
__COMPILER_BARRIER();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Interrupt Enable status
|
||||
\details Returns a device specific interrupt enable status from the NVIC interrupt controller.
|
||||
\param [in] IRQn Device specific interrupt number.
|
||||
\return 0 Interrupt is not enabled.
|
||||
\return 1 Interrupt is enabled.
|
||||
\note IRQn must not be negative.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __NVIC_GetEnableIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
return((uint32_t)(((NVIC->ISER[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
|
||||
}
|
||||
else
|
||||
{
|
||||
return(0U);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Disable Interrupt
|
||||
\details Disables a device specific interrupt in the NVIC interrupt controller.
|
||||
\param [in] IRQn Device specific interrupt number.
|
||||
\note IRQn must not be negative.
|
||||
*/
|
||||
__STATIC_INLINE void __NVIC_DisableIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
NVIC->ICER[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
|
||||
__DSB();
|
||||
__ISB();
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Pending Interrupt
|
||||
\details Reads the NVIC pending register and returns the pending bit for the specified device specific interrupt.
|
||||
\param [in] IRQn Device specific interrupt number.
|
||||
\return 0 Interrupt status is not pending.
|
||||
\return 1 Interrupt status is pending.
|
||||
\note IRQn must not be negative.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __NVIC_GetPendingIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
return((uint32_t)(((NVIC->ISPR[0U] & (1UL << (((uint32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
|
||||
}
|
||||
else
|
||||
{
|
||||
return(0U);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Pending Interrupt
|
||||
\details Sets the pending bit of a device specific interrupt in the NVIC pending register.
|
||||
\param [in] IRQn Device specific interrupt number.
|
||||
\note IRQn must not be negative.
|
||||
*/
|
||||
__STATIC_INLINE void __NVIC_SetPendingIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
NVIC->ISPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Clear Pending Interrupt
|
||||
\details Clears the pending bit of a device specific interrupt in the NVIC pending register.
|
||||
\param [in] IRQn Device specific interrupt number.
|
||||
\note IRQn must not be negative.
|
||||
*/
|
||||
__STATIC_INLINE void __NVIC_ClearPendingIRQ(IRQn_Type IRQn)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
NVIC->ICPR[0U] = (uint32_t)(1UL << (((uint32_t)IRQn) & 0x1FUL));
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Interrupt Priority
|
||||
\details Sets the priority of a device specific interrupt or a processor exception.
|
||||
The interrupt number can be positive to specify a device specific interrupt,
|
||||
or negative to specify a processor exception.
|
||||
\param [in] IRQn Interrupt number.
|
||||
\param [in] priority Priority to set.
|
||||
\note The priority cannot be set for every processor exception.
|
||||
*/
|
||||
__STATIC_INLINE void __NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
|
||||
{
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
NVIC->IP[_IP_IDX(IRQn)] = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
|
||||
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
|
||||
}
|
||||
else
|
||||
{
|
||||
SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
|
||||
(((priority << (8U - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Interrupt Priority
|
||||
\details Reads the priority of a device specific interrupt or a processor exception.
|
||||
The interrupt number can be positive to specify a device specific interrupt,
|
||||
or negative to specify a processor exception.
|
||||
\param [in] IRQn Interrupt number.
|
||||
\return Interrupt Priority.
|
||||
Value is aligned automatically to the implemented priority bits of the microcontroller.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __NVIC_GetPriority(IRQn_Type IRQn)
|
||||
{
|
||||
|
||||
if ((int32_t)(IRQn) >= 0)
|
||||
{
|
||||
return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
|
||||
}
|
||||
else
|
||||
{
|
||||
return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8U - __NVIC_PRIO_BITS)));
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Encode Priority
|
||||
\details Encodes the priority for an interrupt with the given priority group,
|
||||
preemptive priority value, and subpriority value.
|
||||
In case of a conflict between priority grouping and available
|
||||
priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
|
||||
\param [in] PriorityGroup Used priority group.
|
||||
\param [in] PreemptPriority Preemptive priority value (starting from 0).
|
||||
\param [in] SubPriority Subpriority value (starting from 0).
|
||||
\return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
|
||||
*/
|
||||
__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
|
||||
{
|
||||
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
|
||||
uint32_t PreemptPriorityBits;
|
||||
uint32_t SubPriorityBits;
|
||||
|
||||
PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
|
||||
SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
|
||||
|
||||
return (
|
||||
((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
|
||||
((SubPriority & (uint32_t)((1UL << (SubPriorityBits )) - 1UL)))
|
||||
);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Decode Priority
|
||||
\details Decodes an interrupt priority value with a given priority group to
|
||||
preemptive priority value and subpriority value.
|
||||
In case of a conflict between priority grouping and available
|
||||
priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
|
||||
\param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
|
||||
\param [in] PriorityGroup Used priority group.
|
||||
\param [out] pPreemptPriority Preemptive priority value (starting from 0).
|
||||
\param [out] pSubPriority Subpriority value (starting from 0).
|
||||
*/
|
||||
__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* const pPreemptPriority, uint32_t* const pSubPriority)
|
||||
{
|
||||
uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL); /* only values 0..7 are used */
|
||||
uint32_t PreemptPriorityBits;
|
||||
uint32_t SubPriorityBits;
|
||||
|
||||
PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
|
||||
SubPriorityBits = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
|
||||
|
||||
*pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
|
||||
*pSubPriority = (Priority ) & (uint32_t)((1UL << (SubPriorityBits )) - 1UL);
|
||||
}
|
||||
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Interrupt Vector
|
||||
\details Sets an interrupt vector in SRAM based interrupt vector table.
|
||||
The interrupt number can be positive to specify a device specific interrupt,
|
||||
or negative to specify a processor exception.
|
||||
Address 0 must be mapped to SRAM.
|
||||
\param [in] IRQn Interrupt number
|
||||
\param [in] vector Address of interrupt handler function
|
||||
*/
|
||||
__STATIC_INLINE void __NVIC_SetVector(IRQn_Type IRQn, uint32_t vector)
|
||||
{
|
||||
uint32_t *vectors = (uint32_t *)0x0U;
|
||||
vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET] = vector;
|
||||
/* ARM Application Note 321 states that the M1 does not require the architectural barrier */
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Interrupt Vector
|
||||
\details Reads an interrupt vector from interrupt vector table.
|
||||
The interrupt number can be positive to specify a device specific interrupt,
|
||||
or negative to specify a processor exception.
|
||||
\param [in] IRQn Interrupt number.
|
||||
\return Address of interrupt handler function
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __NVIC_GetVector(IRQn_Type IRQn)
|
||||
{
|
||||
uint32_t *vectors = (uint32_t *)0x0U;
|
||||
return vectors[(int32_t)IRQn + NVIC_USER_IRQ_OFFSET];
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief System Reset
|
||||
\details Initiates a system reset request to reset the MCU.
|
||||
*/
|
||||
__NO_RETURN __STATIC_INLINE void __NVIC_SystemReset(void)
|
||||
{
|
||||
__DSB(); /* Ensure all outstanding memory accesses included
|
||||
buffered write are completed before reset */
|
||||
SCB->AIRCR = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
|
||||
SCB_AIRCR_SYSRESETREQ_Msk);
|
||||
__DSB(); /* Ensure completion of memory access */
|
||||
|
||||
for(;;) /* wait until reset */
|
||||
{
|
||||
__NOP();
|
||||
}
|
||||
}
|
||||
|
||||
/*@} end of CMSIS_Core_NVICFunctions */
|
||||
|
||||
|
||||
/* ########################## FPU functions #################################### */
|
||||
/**
|
||||
\ingroup CMSIS_Core_FunctionInterface
|
||||
\defgroup CMSIS_Core_FpuFunctions FPU Functions
|
||||
\brief Function that provides FPU type.
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief get FPU type
|
||||
\details returns the FPU type
|
||||
\returns
|
||||
- \b 0: No FPU
|
||||
- \b 1: Single precision FPU
|
||||
- \b 2: Double + Single precision FPU
|
||||
*/
|
||||
__STATIC_INLINE uint32_t SCB_GetFPUType(void)
|
||||
{
|
||||
return 0U; /* No FPU */
|
||||
}
|
||||
|
||||
|
||||
/*@} end of CMSIS_Core_FpuFunctions */
|
||||
|
||||
|
||||
|
||||
/* ################################## SysTick function ############################################ */
|
||||
/**
|
||||
\ingroup CMSIS_Core_FunctionInterface
|
||||
\defgroup CMSIS_Core_SysTickFunctions SysTick Functions
|
||||
\brief Functions that configure the System.
|
||||
@{
|
||||
*/
|
||||
|
||||
#if defined (__Vendor_SysTickConfig) && (__Vendor_SysTickConfig == 0U)
|
||||
|
||||
/**
|
||||
\brief System Tick Configuration
|
||||
\details Initializes the System Timer and its interrupt, and starts the System Tick Timer.
|
||||
Counter is in free running mode to generate periodic interrupts.
|
||||
\param [in] ticks Number of ticks between two interrupts.
|
||||
\return 0 Function succeeded.
|
||||
\return 1 Function failed.
|
||||
\note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
|
||||
function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
|
||||
must contain a vendor-specific implementation of this function.
|
||||
*/
|
||||
__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
|
||||
{
|
||||
if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk)
|
||||
{
|
||||
return (1UL); /* Reload value impossible */
|
||||
}
|
||||
|
||||
SysTick->LOAD = (uint32_t)(ticks - 1UL); /* set reload register */
|
||||
NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
|
||||
SysTick->VAL = 0UL; /* Load the SysTick Counter Value */
|
||||
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
|
||||
SysTick_CTRL_TICKINT_Msk |
|
||||
SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
|
||||
return (0UL); /* Function successful */
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
/*@} end of CMSIS_Core_SysTickFunctions */
|
||||
|
||||
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __CORE_CM1_H_DEPENDANT */
|
||||
|
||||
#endif /* __CMSIS_GENERIC */
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,366 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_exti.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of EXTI HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2018 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef STM32f4xx_HAL_EXTI_H
|
||||
#define STM32f4xx_HAL_EXTI_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI EXTI
|
||||
* @brief EXTI HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup EXTI_Exported_Types EXTI Exported Types
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
HAL_EXTI_COMMON_CB_ID = 0x00U
|
||||
} EXTI_CallbackIDTypeDef;
|
||||
|
||||
/**
|
||||
* @brief EXTI Handle structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Line; /*!< Exti line number */
|
||||
void (* PendingCallback)(void); /*!< Exti pending callback */
|
||||
} EXTI_HandleTypeDef;
|
||||
|
||||
/**
|
||||
* @brief EXTI Configuration structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Line; /*!< The Exti line to be configured. This parameter
|
||||
can be a value of @ref EXTI_Line */
|
||||
uint32_t Mode; /*!< The Exit Mode to be configured for a core.
|
||||
This parameter can be a combination of @ref EXTI_Mode */
|
||||
uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter
|
||||
can be a value of @ref EXTI_Trigger */
|
||||
uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured.
|
||||
This parameter is only possible for line 0 to 15. It
|
||||
can be a value of @ref EXTI_GPIOSel */
|
||||
} EXTI_ConfigTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Exported_Constants EXTI Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Line EXTI Line
|
||||
* @{
|
||||
*/
|
||||
#define EXTI_LINE_0 (EXTI_GPIO | 0x00u) /*!< External interrupt line 0 */
|
||||
#define EXTI_LINE_1 (EXTI_GPIO | 0x01u) /*!< External interrupt line 1 */
|
||||
#define EXTI_LINE_2 (EXTI_GPIO | 0x02u) /*!< External interrupt line 2 */
|
||||
#define EXTI_LINE_3 (EXTI_GPIO | 0x03u) /*!< External interrupt line 3 */
|
||||
#define EXTI_LINE_4 (EXTI_GPIO | 0x04u) /*!< External interrupt line 4 */
|
||||
#define EXTI_LINE_5 (EXTI_GPIO | 0x05u) /*!< External interrupt line 5 */
|
||||
#define EXTI_LINE_6 (EXTI_GPIO | 0x06u) /*!< External interrupt line 6 */
|
||||
#define EXTI_LINE_7 (EXTI_GPIO | 0x07u) /*!< External interrupt line 7 */
|
||||
#define EXTI_LINE_8 (EXTI_GPIO | 0x08u) /*!< External interrupt line 8 */
|
||||
#define EXTI_LINE_9 (EXTI_GPIO | 0x09u) /*!< External interrupt line 9 */
|
||||
#define EXTI_LINE_10 (EXTI_GPIO | 0x0Au) /*!< External interrupt line 10 */
|
||||
#define EXTI_LINE_11 (EXTI_GPIO | 0x0Bu) /*!< External interrupt line 11 */
|
||||
#define EXTI_LINE_12 (EXTI_GPIO | 0x0Cu) /*!< External interrupt line 12 */
|
||||
#define EXTI_LINE_13 (EXTI_GPIO | 0x0Du) /*!< External interrupt line 13 */
|
||||
#define EXTI_LINE_14 (EXTI_GPIO | 0x0Eu) /*!< External interrupt line 14 */
|
||||
#define EXTI_LINE_15 (EXTI_GPIO | 0x0Fu) /*!< External interrupt line 15 */
|
||||
#define EXTI_LINE_16 (EXTI_CONFIG | 0x10u) /*!< External interrupt line 16 Connected to the PVD Output */
|
||||
#define EXTI_LINE_17 (EXTI_CONFIG | 0x11u) /*!< External interrupt line 17 Connected to the RTC Alarm event */
|
||||
#if defined(EXTI_IMR_IM18)
|
||||
#define EXTI_LINE_18 (EXTI_CONFIG | 0x12u) /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */
|
||||
#else
|
||||
#define EXTI_LINE_18 (EXTI_RESERVED | 0x12u) /*!< No interrupt supported in this line */
|
||||
#endif /* EXTI_IMR_IM18 */
|
||||
#if defined(EXTI_IMR_IM19)
|
||||
#define EXTI_LINE_19 (EXTI_CONFIG | 0x13u) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */
|
||||
#else
|
||||
#define EXTI_LINE_19 (EXTI_RESERVED | 0x13u) /*!< No interrupt supported in this line */
|
||||
#endif /* EXTI_IMR_IM19 */
|
||||
#if defined(EXTI_IMR_IM20)
|
||||
#define EXTI_LINE_20 (EXTI_CONFIG | 0x14u) /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event */
|
||||
#else
|
||||
#define EXTI_LINE_20 (EXTI_RESERVED | 0x14u) /*!< No interrupt supported in this line */
|
||||
#endif /* EXTI_IMR_IM20 */
|
||||
#define EXTI_LINE_21 (EXTI_CONFIG | 0x15u) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
|
||||
#define EXTI_LINE_22 (EXTI_CONFIG | 0x16u) /*!< External interrupt line 22 Connected to the RTC Wakeup event */
|
||||
#if defined(EXTI_IMR_IM23)
|
||||
#define EXTI_LINE_23 (EXTI_CONFIG | 0x17u) /*!< External interrupt line 23 Connected to the LPTIM1 asynchronous event */
|
||||
#endif /* EXTI_IMR_IM23 */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Mode EXTI Mode
|
||||
* @{
|
||||
*/
|
||||
#define EXTI_MODE_NONE 0x00000000u
|
||||
#define EXTI_MODE_INTERRUPT 0x00000001u
|
||||
#define EXTI_MODE_EVENT 0x00000002u
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Trigger EXTI Trigger
|
||||
* @{
|
||||
*/
|
||||
|
||||
#define EXTI_TRIGGER_NONE 0x00000000u
|
||||
#define EXTI_TRIGGER_RISING 0x00000001u
|
||||
#define EXTI_TRIGGER_FALLING 0x00000002u
|
||||
#define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_GPIOSel EXTI GPIOSel
|
||||
* @brief
|
||||
* @{
|
||||
*/
|
||||
#define EXTI_GPIOA 0x00000000u
|
||||
#define EXTI_GPIOB 0x00000001u
|
||||
#define EXTI_GPIOC 0x00000002u
|
||||
#if defined (GPIOD)
|
||||
#define EXTI_GPIOD 0x00000003u
|
||||
#endif /* GPIOD */
|
||||
#if defined (GPIOE)
|
||||
#define EXTI_GPIOE 0x00000004u
|
||||
#endif /* GPIOE */
|
||||
#if defined (GPIOF)
|
||||
#define EXTI_GPIOF 0x00000005u
|
||||
#endif /* GPIOF */
|
||||
#if defined (GPIOG)
|
||||
#define EXTI_GPIOG 0x00000006u
|
||||
#endif /* GPIOG */
|
||||
#if defined (GPIOH)
|
||||
#define EXTI_GPIOH 0x00000007u
|
||||
#endif /* GPIOH */
|
||||
#if defined (GPIOI)
|
||||
#define EXTI_GPIOI 0x00000008u
|
||||
#endif /* GPIOI */
|
||||
#if defined (GPIOJ)
|
||||
#define EXTI_GPIOJ 0x00000009u
|
||||
#endif /* GPIOJ */
|
||||
#if defined (GPIOK)
|
||||
#define EXTI_GPIOK 0x0000000Au
|
||||
#endif /* GPIOK */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Exported_Macros EXTI Exported Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private constants --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Private_Constants EXTI Private Constants
|
||||
* @{
|
||||
*/
|
||||
/**
|
||||
* @brief EXTI Line property definition
|
||||
*/
|
||||
#define EXTI_PROPERTY_SHIFT 24u
|
||||
#define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT)
|
||||
#define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG)
|
||||
#define EXTI_RESERVED (0x08uL << EXTI_PROPERTY_SHIFT)
|
||||
#define EXTI_PROPERTY_MASK (EXTI_CONFIG | EXTI_GPIO)
|
||||
|
||||
/**
|
||||
* @brief EXTI bit usage
|
||||
*/
|
||||
#define EXTI_PIN_MASK 0x0000001Fu
|
||||
|
||||
/**
|
||||
* @brief EXTI Mask for interrupt & event mode
|
||||
*/
|
||||
#define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT)
|
||||
|
||||
/**
|
||||
* @brief EXTI Mask for trigger possibilities
|
||||
*/
|
||||
#define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING)
|
||||
|
||||
/**
|
||||
* @brief EXTI Line number
|
||||
*/
|
||||
#if defined(EXTI_IMR_IM23)
|
||||
#define EXTI_LINE_NB 24UL
|
||||
#else
|
||||
#define EXTI_LINE_NB 23UL
|
||||
#endif /* EXTI_IMR_IM23 */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Private_Macros EXTI Private Macros
|
||||
* @{
|
||||
*/
|
||||
#define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \
|
||||
((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \
|
||||
(((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \
|
||||
(((__EXTI_LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB))
|
||||
|
||||
#define IS_EXTI_MODE(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \
|
||||
(((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u))
|
||||
|
||||
#define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u)
|
||||
|
||||
#define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING)
|
||||
|
||||
#define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u)
|
||||
|
||||
#if !defined (GPIOD)
|
||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
||||
((__PORT__) == EXTI_GPIOB) || \
|
||||
((__PORT__) == EXTI_GPIOC) || \
|
||||
((__PORT__) == EXTI_GPIOH))
|
||||
#elif !defined (GPIOE)
|
||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
||||
((__PORT__) == EXTI_GPIOB) || \
|
||||
((__PORT__) == EXTI_GPIOC) || \
|
||||
((__PORT__) == EXTI_GPIOD) || \
|
||||
((__PORT__) == EXTI_GPIOH))
|
||||
#elif !defined (GPIOF)
|
||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
||||
((__PORT__) == EXTI_GPIOB) || \
|
||||
((__PORT__) == EXTI_GPIOC) || \
|
||||
((__PORT__) == EXTI_GPIOD) || \
|
||||
((__PORT__) == EXTI_GPIOE) || \
|
||||
((__PORT__) == EXTI_GPIOH))
|
||||
#elif !defined (GPIOI)
|
||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
||||
((__PORT__) == EXTI_GPIOB) || \
|
||||
((__PORT__) == EXTI_GPIOC) || \
|
||||
((__PORT__) == EXTI_GPIOD) || \
|
||||
((__PORT__) == EXTI_GPIOE) || \
|
||||
((__PORT__) == EXTI_GPIOF) || \
|
||||
((__PORT__) == EXTI_GPIOG) || \
|
||||
((__PORT__) == EXTI_GPIOH))
|
||||
#elif !defined (GPIOJ)
|
||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
||||
((__PORT__) == EXTI_GPIOB) || \
|
||||
((__PORT__) == EXTI_GPIOC) || \
|
||||
((__PORT__) == EXTI_GPIOD) || \
|
||||
((__PORT__) == EXTI_GPIOE) || \
|
||||
((__PORT__) == EXTI_GPIOF) || \
|
||||
((__PORT__) == EXTI_GPIOG) || \
|
||||
((__PORT__) == EXTI_GPIOH) || \
|
||||
((__PORT__) == EXTI_GPIOI))
|
||||
#else
|
||||
#define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \
|
||||
((__PORT__) == EXTI_GPIOB) || \
|
||||
((__PORT__) == EXTI_GPIOC) || \
|
||||
((__PORT__) == EXTI_GPIOD) || \
|
||||
((__PORT__) == EXTI_GPIOE) || \
|
||||
((__PORT__) == EXTI_GPIOF) || \
|
||||
((__PORT__) == EXTI_GPIOG) || \
|
||||
((__PORT__) == EXTI_GPIOH) || \
|
||||
((__PORT__) == EXTI_GPIOI) || \
|
||||
((__PORT__) == EXTI_GPIOJ) || \
|
||||
((__PORT__) == EXTI_GPIOK))
|
||||
#endif /* GPIOD */
|
||||
|
||||
#define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16U)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @defgroup EXTI_Exported_Functions EXTI Exported Functions
|
||||
* @brief EXTI Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Exported_Functions_Group1 Configuration functions
|
||||
* @brief Configuration functions
|
||||
* @{
|
||||
*/
|
||||
/* Configuration functions ****************************************************/
|
||||
HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
|
||||
HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig);
|
||||
HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti);
|
||||
HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void));
|
||||
HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_Exported_Functions_Group2 IO operation functions
|
||||
* @brief IO operation functions
|
||||
* @{
|
||||
*/
|
||||
/* IO operation functions *****************************************************/
|
||||
void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti);
|
||||
uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
|
||||
void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge);
|
||||
void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti);
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* STM32f4xx_HAL_EXTI_H */
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,436 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_pwr.h
|
||||
* @author MCD Application Team
|
||||
* @brief Header file of PWR HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file in
|
||||
* the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_PWR_H
|
||||
#define __STM32F4xx_HAL_PWR_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal_def.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWR
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
|
||||
/** @defgroup PWR_Exported_Types PWR Exported Types
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief PWR PVD configuration structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level.
|
||||
This parameter can be a value of @ref PWR_PVD_detection_level */
|
||||
|
||||
uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
|
||||
This parameter can be a value of @ref PWR_PVD_Mode */
|
||||
}PWR_PVDTypeDef;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/** @defgroup PWR_Exported_Constants PWR Exported Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins
|
||||
* @{
|
||||
*/
|
||||
#define PWR_WAKEUP_PIN1 0x00000100U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_PVD_detection_level PWR PVD detection level
|
||||
* @{
|
||||
*/
|
||||
#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0
|
||||
#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1
|
||||
#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2
|
||||
#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3
|
||||
#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4
|
||||
#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5
|
||||
#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6
|
||||
#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7/* External input analog voltage
|
||||
(Compare internally to VREFINT) */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_PVD_Mode PWR PVD Mode
|
||||
* @{
|
||||
*/
|
||||
#define PWR_PVD_MODE_NORMAL 0x00000000U /*!< basic mode is used */
|
||||
#define PWR_PVD_MODE_IT_RISING 0x00010001U /*!< External Interrupt Mode with Rising edge trigger detection */
|
||||
#define PWR_PVD_MODE_IT_FALLING 0x00010002U /*!< External Interrupt Mode with Falling edge trigger detection */
|
||||
#define PWR_PVD_MODE_IT_RISING_FALLING 0x00010003U /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
|
||||
#define PWR_PVD_MODE_EVENT_RISING 0x00020001U /*!< Event Mode with Rising edge trigger detection */
|
||||
#define PWR_PVD_MODE_EVENT_FALLING 0x00020002U /*!< Event Mode with Falling edge trigger detection */
|
||||
#define PWR_PVD_MODE_EVENT_RISING_FALLING 0x00020003U /*!< Event Mode with Rising/Falling edge trigger detection */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode
|
||||
* @{
|
||||
*/
|
||||
#define PWR_MAINREGULATOR_ON 0x00000000U
|
||||
#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
|
||||
* @{
|
||||
*/
|
||||
#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01)
|
||||
#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02)
|
||||
#define PWR_SLEEPENTRY_WFE_NO_EVT_CLEAR ((uint8_t)0x03)
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
|
||||
* @{
|
||||
*/
|
||||
#define PWR_STOPENTRY_WFI ((uint8_t)0x01)
|
||||
#define PWR_STOPENTRY_WFE ((uint8_t)0x02)
|
||||
#define PWR_STOPENTRY_WFE_NO_EVT_CLEAR ((uint8_t)0x03)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_Flag PWR Flag
|
||||
* @{
|
||||
*/
|
||||
#define PWR_FLAG_WU PWR_CSR_WUF
|
||||
#define PWR_FLAG_SB PWR_CSR_SBF
|
||||
#define PWR_FLAG_PVDO PWR_CSR_PVDO
|
||||
#define PWR_FLAG_BRR PWR_CSR_BRR
|
||||
#define PWR_FLAG_VOSRDY PWR_CSR_VOSRDY
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/** @defgroup PWR_Exported_Macro PWR Exported Macro
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @brief Check PWR flag is set or not.
|
||||
* @param __FLAG__ specifies the flag to check.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
|
||||
* was received from the WKUP pin or from the RTC alarm (Alarm A
|
||||
* or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
|
||||
* An additional wakeup event is detected if the WKUP pin is enabled
|
||||
* (by setting the EWUP bit) when the WKUP pin level is already high.
|
||||
* @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
|
||||
* resumed from StandBy mode.
|
||||
* @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
|
||||
* by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
|
||||
* For this reason, this bit is equal to 0 after Standby or reset
|
||||
* until the PVDE bit is set.
|
||||
* @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset
|
||||
* when the device wakes up from Standby mode or by a system reset
|
||||
* or power reset.
|
||||
* @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage
|
||||
* scaling output selection is ready.
|
||||
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
||||
*/
|
||||
#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
|
||||
|
||||
/** @brief Clear the PWR's pending flags.
|
||||
* @param __FLAG__ specifies the flag to clear.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PWR_FLAG_WU: Wake Up flag
|
||||
* @arg PWR_FLAG_SB: StandBy flag
|
||||
*/
|
||||
#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2U)
|
||||
|
||||
/**
|
||||
* @brief Enable the PVD Exti Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD EXTI Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Enable event on PVD Exti Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Disable event on PVD Exti Line 16.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Enable the PVD Extended Interrupt Rising Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD Extended Interrupt Rising Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
/**
|
||||
* @brief Enable the PVD Extended Interrupt Falling Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD Extended Interrupt Falling Trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
|
||||
|
||||
|
||||
/**
|
||||
* @brief PVD EXTI line configuration: set rising & falling edge trigger.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() do{__HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();\
|
||||
__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();\
|
||||
}while(0U)
|
||||
|
||||
/**
|
||||
* @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
|
||||
* This parameter can be:
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() do{__HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();\
|
||||
__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();\
|
||||
}while(0U)
|
||||
|
||||
/**
|
||||
* @brief checks whether the specified PVD Exti interrupt flag is set or not.
|
||||
* @retval EXTI PVD Line Status.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Clear the PVD Exti flag.
|
||||
* @retval None.
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @brief Generates a Software interrupt on PVD EXTI line.
|
||||
* @retval None
|
||||
*/
|
||||
#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Include PWR HAL Extension module */
|
||||
#include "stm32f4xx_hal_pwr_ex.h"
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
/** @addtogroup PWR_Exported_Functions PWR Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
|
||||
* @{
|
||||
*/
|
||||
/* Initialization and de-initialization functions *****************************/
|
||||
void HAL_PWR_DeInit(void);
|
||||
void HAL_PWR_EnableBkUpAccess(void);
|
||||
void HAL_PWR_DisableBkUpAccess(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
|
||||
* @{
|
||||
*/
|
||||
/* Peripheral Control functions **********************************************/
|
||||
/* PVD configuration */
|
||||
void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
|
||||
void HAL_PWR_EnablePVD(void);
|
||||
void HAL_PWR_DisablePVD(void);
|
||||
|
||||
/* WakeUp pins configuration */
|
||||
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
|
||||
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
|
||||
|
||||
/* Low Power modes entry */
|
||||
void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
|
||||
void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
|
||||
void HAL_PWR_EnterSTANDBYMode(void);
|
||||
|
||||
/* Power PVD IRQ Handler */
|
||||
void HAL_PWR_PVD_IRQHandler(void);
|
||||
void HAL_PWR_PVDCallback(void);
|
||||
|
||||
/* Cortex System Control functions *******************************************/
|
||||
void HAL_PWR_EnableSleepOnExit(void);
|
||||
void HAL_PWR_DisableSleepOnExit(void);
|
||||
void HAL_PWR_EnableSEVOnPend(void);
|
||||
void HAL_PWR_DisableSEVOnPend(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private constants ---------------------------------------------------------*/
|
||||
/** @defgroup PWR_Private_Constants PWR Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line
|
||||
* @{
|
||||
*/
|
||||
#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_MR16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_register_alias_address PWR Register alias address
|
||||
* @{
|
||||
*/
|
||||
/* ------------- PWR registers bit address in the alias region ---------------*/
|
||||
#define PWR_OFFSET (PWR_BASE - PERIPH_BASE)
|
||||
#define PWR_CR_OFFSET 0x00U
|
||||
#define PWR_CSR_OFFSET 0x04U
|
||||
#define PWR_CR_OFFSET_BB (PWR_OFFSET + PWR_CR_OFFSET)
|
||||
#define PWR_CSR_OFFSET_BB (PWR_OFFSET + PWR_CSR_OFFSET)
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_CR_register_alias PWR CR Register alias address
|
||||
* @{
|
||||
*/
|
||||
/* --- CR Register ---*/
|
||||
/* Alias word address of DBP bit */
|
||||
#define DBP_BIT_NUMBER PWR_CR_DBP_Pos
|
||||
#define CR_DBP_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (DBP_BIT_NUMBER * 4U))
|
||||
|
||||
/* Alias word address of PVDE bit */
|
||||
#define PVDE_BIT_NUMBER PWR_CR_PVDE_Pos
|
||||
#define CR_PVDE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (PVDE_BIT_NUMBER * 4U))
|
||||
|
||||
/* Alias word address of VOS bit */
|
||||
#define VOS_BIT_NUMBER PWR_CR_VOS_Pos
|
||||
#define CR_VOS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32U) + (VOS_BIT_NUMBER * 4U))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_CSR_register_alias PWR CSR Register alias address
|
||||
* @{
|
||||
*/
|
||||
/* --- CSR Register ---*/
|
||||
/* Alias word address of EWUP bit */
|
||||
#define EWUP_BIT_NUMBER PWR_CSR_EWUP_Pos
|
||||
#define CSR_EWUP_BB (PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32U) + (EWUP_BIT_NUMBER * 4U))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/** @defgroup PWR_Private_Macros PWR Private Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters
|
||||
* @{
|
||||
*/
|
||||
#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
|
||||
((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
|
||||
((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
|
||||
((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
|
||||
#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
|
||||
((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
|
||||
((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
|
||||
((MODE) == PWR_PVD_MODE_NORMAL))
|
||||
#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
|
||||
((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
|
||||
|
||||
#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || \
|
||||
((ENTRY) == PWR_SLEEPENTRY_WFE) || \
|
||||
((ENTRY) == PWR_SLEEPENTRY_WFE_NO_EVT_CLEAR))
|
||||
|
||||
#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || \
|
||||
((ENTRY) == PWR_STOPENTRY_WFE) || \
|
||||
((ENTRY) == PWR_STOPENTRY_WFE_NO_EVT_CLEAR))
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* __STM32F4xx_HAL_PWR_H */
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,313 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_dma_ex.c
|
||||
* @author MCD Application Team
|
||||
* @brief DMA Extension HAL module driver
|
||||
* This file provides firmware functions to manage the following
|
||||
* functionalities of the DMA Extension peripheral:
|
||||
* + Extended features functions
|
||||
*
|
||||
@verbatim
|
||||
==============================================================================
|
||||
##### How to use this driver #####
|
||||
==============================================================================
|
||||
[..]
|
||||
The DMA Extension HAL driver can be used as follows:
|
||||
(#) Start a multi buffer transfer using the HAL_DMA_MultiBufferStart() function
|
||||
for polling mode or HAL_DMA_MultiBufferStart_IT() for interrupt mode.
|
||||
|
||||
-@- In Memory-to-Memory transfer mode, Multi (Double) Buffer mode is not allowed.
|
||||
-@- When Multi (Double) Buffer mode is enabled the, transfer is circular by default.
|
||||
-@- In Multi (Double) buffer mode, it is possible to update the base address for
|
||||
the AHB memory port on the fly (DMA_SxM0AR or DMA_SxM1AR) when the stream is enabled.
|
||||
|
||||
@endverbatim
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file in
|
||||
* the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f4xx_hal.h"
|
||||
|
||||
/** @addtogroup STM32F4xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup DMAEx DMAEx
|
||||
* @brief DMA Extended HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
|
||||
/* Private types -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private Constants ---------------------------------------------------------*/
|
||||
/* Private macros ------------------------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
/** @addtogroup DMAEx_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Exported functions ---------------------------------------------------------*/
|
||||
|
||||
/** @addtogroup DMAEx_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup DMAEx_Exported_Functions_Group1
|
||||
*
|
||||
@verbatim
|
||||
===============================================================================
|
||||
##### Extended features functions #####
|
||||
===============================================================================
|
||||
[..] This section provides functions allowing to:
|
||||
(+) Configure the source, destination address and data length and
|
||||
Start MultiBuffer DMA transfer
|
||||
(+) Configure the source, destination address and data length and
|
||||
Start MultiBuffer DMA transfer with interrupt
|
||||
(+) Change on the fly the memory0 or memory1 address.
|
||||
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
|
||||
/**
|
||||
* @brief Starts the multi_buffer DMA Transfer.
|
||||
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified DMA Stream.
|
||||
* @param SrcAddress The source memory Buffer address
|
||||
* @param DstAddress The destination memory Buffer address
|
||||
* @param SecondMemAddress The second memory Buffer address in case of multi buffer Transfer
|
||||
* @param DataLength The length of data to be transferred from source to destination
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
|
||||
{
|
||||
HAL_StatusTypeDef status = HAL_OK;
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_DMA_BUFFER_SIZE(DataLength));
|
||||
|
||||
/* Memory-to-memory transfer not supported in double buffering mode */
|
||||
if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY)
|
||||
{
|
||||
hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
|
||||
status = HAL_ERROR;
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Process Locked */
|
||||
__HAL_LOCK(hdma);
|
||||
|
||||
if(HAL_DMA_STATE_READY == hdma->State)
|
||||
{
|
||||
/* Change DMA peripheral state */
|
||||
hdma->State = HAL_DMA_STATE_BUSY;
|
||||
|
||||
/* Enable the double buffer mode */
|
||||
hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM;
|
||||
|
||||
/* Configure DMA Stream destination address */
|
||||
hdma->Instance->M1AR = SecondMemAddress;
|
||||
|
||||
/* Configure the source, destination address and the data length */
|
||||
DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
|
||||
|
||||
/* Enable the peripheral */
|
||||
__HAL_DMA_ENABLE(hdma);
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Return error status */
|
||||
status = HAL_BUSY;
|
||||
}
|
||||
}
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Starts the multi_buffer DMA Transfer with interrupt enabled.
|
||||
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified DMA Stream.
|
||||
* @param SrcAddress The source memory Buffer address
|
||||
* @param DstAddress The destination memory Buffer address
|
||||
* @param SecondMemAddress The second memory Buffer address in case of multi buffer Transfer
|
||||
* @param DataLength The length of data to be transferred from source to destination
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
|
||||
{
|
||||
HAL_StatusTypeDef status = HAL_OK;
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_DMA_BUFFER_SIZE(DataLength));
|
||||
|
||||
/* Memory-to-memory transfer not supported in double buffering mode */
|
||||
if (hdma->Init.Direction == DMA_MEMORY_TO_MEMORY)
|
||||
{
|
||||
hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED;
|
||||
return HAL_ERROR;
|
||||
}
|
||||
|
||||
/* Check callback functions */
|
||||
if ((NULL == hdma->XferCpltCallback) || (NULL == hdma->XferM1CpltCallback) || (NULL == hdma->XferErrorCallback))
|
||||
{
|
||||
hdma->ErrorCode = HAL_DMA_ERROR_PARAM;
|
||||
return HAL_ERROR;
|
||||
}
|
||||
|
||||
/* Process locked */
|
||||
__HAL_LOCK(hdma);
|
||||
|
||||
if(HAL_DMA_STATE_READY == hdma->State)
|
||||
{
|
||||
/* Change DMA peripheral state */
|
||||
hdma->State = HAL_DMA_STATE_BUSY;
|
||||
|
||||
/* Initialize the error code */
|
||||
hdma->ErrorCode = HAL_DMA_ERROR_NONE;
|
||||
|
||||
/* Enable the Double buffer mode */
|
||||
hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM;
|
||||
|
||||
/* Configure DMA Stream destination address */
|
||||
hdma->Instance->M1AR = SecondMemAddress;
|
||||
|
||||
/* Configure the source, destination address and the data length */
|
||||
DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
|
||||
|
||||
/* Clear all flags */
|
||||
__HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma));
|
||||
__HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
|
||||
__HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma));
|
||||
__HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_DME_FLAG_INDEX(hdma));
|
||||
__HAL_DMA_CLEAR_FLAG (hdma, __HAL_DMA_GET_FE_FLAG_INDEX(hdma));
|
||||
|
||||
/* Enable Common interrupts*/
|
||||
hdma->Instance->CR |= DMA_IT_TC | DMA_IT_TE | DMA_IT_DME;
|
||||
hdma->Instance->FCR |= DMA_IT_FE;
|
||||
|
||||
if((hdma->XferHalfCpltCallback != NULL) || (hdma->XferM1HalfCpltCallback != NULL))
|
||||
{
|
||||
hdma->Instance->CR |= DMA_IT_HT;
|
||||
}
|
||||
|
||||
/* Enable the peripheral */
|
||||
__HAL_DMA_ENABLE(hdma);
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Process unlocked */
|
||||
__HAL_UNLOCK(hdma);
|
||||
|
||||
/* Return error status */
|
||||
status = HAL_BUSY;
|
||||
}
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Change the memory0 or memory1 address on the fly.
|
||||
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified DMA Stream.
|
||||
* @param Address The new address
|
||||
* @param memory the memory to be changed, This parameter can be one of
|
||||
* the following values:
|
||||
* MEMORY0 /
|
||||
* MEMORY1
|
||||
* @note The MEMORY0 address can be changed only when the current transfer use
|
||||
* MEMORY1 and the MEMORY1 address can be changed only when the current
|
||||
* transfer use MEMORY0.
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory)
|
||||
{
|
||||
if(memory == MEMORY0)
|
||||
{
|
||||
/* change the memory0 address */
|
||||
hdma->Instance->M0AR = Address;
|
||||
}
|
||||
else
|
||||
{
|
||||
/* change the memory1 address */
|
||||
hdma->Instance->M1AR = Address;
|
||||
}
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup DMAEx_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Set the DMA Transfer parameter.
|
||||
* @param hdma pointer to a DMA_HandleTypeDef structure that contains
|
||||
* the configuration information for the specified DMA Stream.
|
||||
* @param SrcAddress The source memory Buffer address
|
||||
* @param DstAddress The destination memory Buffer address
|
||||
* @param DataLength The length of data to be transferred from source to destination
|
||||
* @retval HAL status
|
||||
*/
|
||||
static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
|
||||
{
|
||||
/* Configure DMA Stream data length */
|
||||
hdma->Instance->NDTR = DataLength;
|
||||
|
||||
/* Peripheral to Memory */
|
||||
if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
|
||||
{
|
||||
/* Configure DMA Stream destination address */
|
||||
hdma->Instance->PAR = DstAddress;
|
||||
|
||||
/* Configure DMA Stream source address */
|
||||
hdma->Instance->M0AR = SrcAddress;
|
||||
}
|
||||
/* Memory to Peripheral */
|
||||
else
|
||||
{
|
||||
/* Configure DMA Stream source address */
|
||||
hdma->Instance->PAR = SrcAddress;
|
||||
|
||||
/* Configure DMA Stream destination address */
|
||||
hdma->Instance->M0AR = DstAddress;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
Reference in New Issue
Block a user