From 1b7590fcbc01916b18c75fa87eb7f0e4f30da5d8 Mon Sep 17 00:00:00 2001 From: Erick Ahmed Date: Sat, 13 Jun 2026 21:35:55 +0200 Subject: [PATCH] Update Hardware --- Hardware.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Hardware.md b/Hardware.md index ab59479..e7b7855 100644 --- a/Hardware.md +++ b/Hardware.md @@ -28,6 +28,6 @@ A useful gadget is the **ST-Link**, to flash the firmware easily on the board (a | Error LED | PB3 | ## Note -Do not add 120Ω resistance! Being it a logger that just reads from a Deutch port, it does not need to terminate the circuit! You can get unpredicatble results and damages if you change the resistance of the CAN network on your machine! +Do not add 120Ω resistance! Being it a logger that just reads from a Deutch port, it does not need to terminate the circuit. You will get unpredicatble results and even risk damages to the ECU if you change the resistance of the CAN network on your machine! All hardware details are fixed in the CubeMX configuration. No changes are needed unless you adapt to a different MCU. \ No newline at end of file