Change data types regarding sensor readings and sensor/actuator pins from signed to unsigned

firmware/atmega/include/moisture.h

@@ -45,7 +45,7 @@ extern volatile bool readSensors;
 
 void sensorsInit(void);
 void triggerMoistureRead(void);
-int16_t moistureAverage(int8_t sensorPin);
+uint16_t moistureAverage(uint8_t sensorPin);
-int16_t moistureRead(void);
+uint16_t moistureRead(void);
 
 #endif

firmware/atmega/source/main.c

@@ -38,10 +38,9 @@ int main(void) {
 
     while(true) {
         if (readSensors) {
-            int16_t result = moistureRead();
+            uint16_t result = moistureRead();
             //espSend(VASE_NUM, result)
         }
-        triggerPump(PUMP_D7, 50);
         // if(espGet("ask if i need to water plants") == true) {waterPlant()}
         enterSleep();
     }

firmware/atmega/source/moisture.c

@@ -21,22 +21,21 @@ void triggerMoistureRead(void) {
     readSensors = true;
 }
 
-int16_t moistureAverage(int8_t sensorPin) {
+uint16_t moistureAverage(uint8_t sensorPin) {
-    int16_t sum = 0;
+    uint16_t sum = 0;
-    for (int i = 0; i < SENSOR_READINGS; i++) {
+    for (uint8_t i = 0; i < SENSOR_READINGS; i++) {
         sum += adcRead(sensorPin);
         //TODO: implement variance check (if over a certain variance discard measurements for this cycle)
-        //TODO: maybe add a small delay using watchdog here?
         //TODO IMPORTANT: if value < 1 or > 1022, discard that measurement
     }
     return sum / SENSOR_READINGS;
 }
 
-int16_t moistureRead(void) {
+uint16_t moistureRead(void) {
     uint16_t overallSum = 0;
 
-    for (int8_t i = 0; i < SENSORS_NUM; i++) {
+    for (uint8_t i = 0; i < SENSORS_NUM; i++) {
-        int16_t sensorAverage = moistureAverage(sensorPins[i]);
+        uint16_t sensorAverage = moistureAverage(sensorPins[i]);
         //TODO: if a sensor gives 0, discard that sensor entirely (means it is disconnected or not working)
         overallSum += sensorAverage;
     }

firmware/atmega/source/pump.c

@@ -12,7 +12,7 @@ void pumpsInit(void) {
     DDRD |= actuatorMask;
 }
 
-void triggerPump(int8_t pump_pin) {
+void triggerPump(uint8_t pump_pin) {
     // Turn on pump
     PORTD |= (1 << pump_pin);
 
@@ -24,9 +24,7 @@ void triggerPump(int8_t pump_pin) {
 }
 
 void waterPlant(void) {
-    for (int i=0; i < ACTUATORS_NUM; i++) {
+    for (uint8_t i=0; i < ACTUATORS_NUM; i++) {
         triggerPump(actuatorPins[i]);
     }
-
-
 }