mmr/Livox-SDK
Archived
1
0
Fork 0
Code Issues 105 Pull Requests 11 Actions Packages Projects Releases 9 Wiki Activity

in ubuntu 20.04 ,static IP can't set successfully! #198

New Issue
Open
opened 2023-03-18 16:37:10 +01:00 by PengKunPROO · 4 comments
PengKunPROO commented 2023-03-18 16:37:10 +01:00 (Migrated from github.com)
Copy Link
Copy Source

I use avia in ubuntu 20.04 ,and set ip to 192.168.1.50 with command like this below
sudo ifconfig enp0s1 192.168.1.50
and the network between avia and computer seems blocked!
2023-03-18 23-31-21 的屏幕截图
the command above is not working,I don't know why the avia connected to my computer failed!

I use avia in ubuntu 20.04 ,and set ip to 192.168.1.50 with command like this below sudo ifconfig enp0s1 192.168.1.50 and the network between avia and computer seems blocked! ![2023-03-18 23-31-21 的屏幕截图](https://user-images.githubusercontent.com/42089076/226115376-3ae94bed-1e02-475c-9256-14a084deb17a.png) the command above is not working,I don't know why the avia connected to my computer failed!
ArcticSnow commented 2024-02-17 13:56:39 +01:00 (Migrated from github.com)
Copy Link
Copy Source

I am running in a similar issue, where I can ping the lidar, but cannot connect to it in any ways. Have you solved the issue @PengKunPROO ?

I am running in a similar issue, where I can ping the lidar, but cannot connect to it in any ways. Have you solved the issue @PengKunPROO ?
C4Consulting commented 2024-10-20 01:15:42 +02:00 (Migrated from github.com)
Copy Link
Copy Source

Wondering if either of you found a solution to this?
I'm likely just going to replace my AVIA with an ultra wide or hemispherical sensor that works on 20.04 and above
New Jetson devices aren't supporting before that SW version anyway and that's the base of my design.

Wondering if either of you found a solution to this? I'm likely just going to replace my AVIA with an ultra wide or hemispherical sensor that works on 20.04 and above New Jetson devices aren't supporting before that SW version anyway and that's the base of my design.
ArcticSnow commented 2024-10-23 14:54:33 +02:00 (Migrated from github.com)
Copy Link
Copy Source

Hello @C4Consulting , if I recall well, you need to turn dow all firewall on the network of the lidar, and if the lidar does not connect, try a hard reboot of the lidar. I have not run in this issue anymore using the Avia.

Hello @C4Consulting , if I recall well, you need to turn dow all firewall on the network of the lidar, and if the lidar does not connect, try a hard reboot of the lidar. I have not run in this issue anymore using the Avia.
C4Consulting commented 2024-10-23 15:00:24 +02:00 (Migrated from github.com)
Copy Link
Copy Source

Thanks for the response! I was using one robosense b pearl and one avía in
my project but since I couldn’t figure it out I just sold the avía for
another b pearl. It was my preference anyway but was initially cost
prohibitive until I found a deal on a used one.

These guys are truly abandoning their best product with this lack of avia
compatibility/support

Cheers

Christopher Allen
Director of Virtual, Design, & Construction

On Wed, Oct 23, 2024 at 5:54 AM Simon Filhol @.***>
wrote:

Hello @C4Consulting https://github.com/C4Consulting , if I recall well,
you need to turn dow all firewall on the network of the lidar, and if the
lidar does not connect, try a hard reboot of the lidar. I have not run in
this issue anymore using the Avia.

—
Reply to this email directly, view it on GitHub
https://github.com/Livox-SDK/Livox-SDK/issues/198#issuecomment-2432061495,
or unsubscribe
https://github.com/notifications/unsubscribe-auth/BLVPE3ZN36ZTT5RMLW2FPC3Z46MCBAVCNFSM6AAAAABQH5BEMOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDIMZSGA3DCNBZGU
.
You are receiving this because you were mentioned.Message ID:
@.***>

Thanks for the response! I was using one robosense b pearl and one avía in my project but since I couldn’t figure it out I just sold the avía for another b pearl. It was my preference anyway but was initially cost prohibitive until I found a deal on a used one. These guys are truly abandoning their best product with this lack of avia compatibility/support Cheers *Christopher Allen* *Director of Virtual, Design, & Construction* * <http://consultc4.com> * *O:301.254.5556* *E: ***@***.*** ***@***.***>* * <http://instagram.com/consultc4> <https://www.linkedin.com/company/consultc4/>* *Creative Coordinated Consulting Company LLC* On Wed, Oct 23, 2024 at 5:54 AM Simon Filhol ***@***.***> wrote: > Hello @C4Consulting <https://github.com/C4Consulting> , if I recall well, > you need to turn dow all firewall on the network of the lidar, and if the > lidar does not connect, try a hard reboot of the lidar. I have not run in > this issue anymore using the Avia. > > — > Reply to this email directly, view it on GitHub > <https://github.com/Livox-SDK/Livox-SDK/issues/198#issuecomment-2432061495>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/BLVPE3ZN36ZTT5RMLW2FPC3Z46MCBAVCNFSM6AAAAABQH5BEMOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDIMZSGA3DCNBZGU> > . > You are receiving this because you were mentioned.Message ID: > ***@***.***> >
This repo is archived. You cannot comment on issues.
No Branch/Tag Specified
Branches Tags
Labels
Clear labels
bug
Something isn't working
 duplicate
This issue or pull request already exists
 enhancement
New feature or request
 good first issue
Good for newcomers
 help wanted
Extra attention is needed
 invalid
This doesn't seem right
 question
Further information is requested
 wontfix
This will not be worked on
No Label
Milestone
No items
No Milestone
Projects
Clear projects
No project
Assignees
Clear assignees
eeeck (Erick)
No Assignees
1 Participants
Due Date
No due date set.
Dependencies

No dependencies set.

Reference: mmr/Livox-SDK#198
Delete Branch "%!s()"

Deleting a branch is permanent. Although the deleted branch may continue to exist for a short time before it actually gets removed, it CANNOT be undone in most cases. Continue?